Rotel-RCD-961-OM 电路图 维修手册.pdf

《Rotel-RCD-961-OM 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Rotel-RCD-961-OM 电路图 维修手册.pdf（10页珍藏版）》请在收音机爱好者资料库上搜索。

1、Owners Manual Manuel de lutilisateur Bedienungsanleitung Manuale di Istruzioni Manual de Instrucciones RCD-961 Stereo Compact Disc Player Lecteur de disque compact Stereo-CD-Player Lettore CD Reproductor de Discos Compactos RadioFans.CN 收音机爱 好者资料库 2 CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLA

2、DE OF PLUG TO WIDE SLOT. INSERT FULLY. APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR THE USAGE ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN C

3、AUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: There are no user serviceable parts inside. Re- fer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electr

4、ic shock, do not expose the unit to moisture or water. Do not allow for- eign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, im- mediately disconnect the power cord from the wall. Take the unit to a qualified service person for ins

5、pection and nec- essary repairs. Read all the instructions before connecting or operating the component. Keep this manual so you can refer to these safety instructions. Heed all warnings and safety information in these instructions and on the product itself. Follow all operating instructions. Clean

6、the enclosure only with a dry cloth or a vacuum cleaner. You must allow 10 cm or 4 inches of unobstructed clearance around the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation slots. If the component is placed in a bookcase or cabinet, there must b

7、e ventilation of the cabinet to allow proper cooling. Keep the component away from radiators, heat registers, stoves, or any other appliance that produces heat. The unit must be connected to a power supply only of the type and volt- age specified on the rear panel of the unit. Connect the component

8、to the power outlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding and/or polarization provi- sions. Do not use extension cords. Do not route the power cord where it will be crushed, pinched, bent at s

9、evere angles, exposed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and where it exits the back of the unit. The power cord should be unplugged from the wall outlet if the unit is to be left unused for a long period of time. Immediately stop using the compone

10、nt and have it inspected and/or ser- viced by a qualified service agency if: The power supply cord or plug has been damaged. Objects have fallen or liquid has been spilled into the unit. The unit has been exposed to rain. The unit shows signs of improper operation The unit has been dropped or damage

11、d in any way Place the unit on a fixed, level surface strong enough to support its weight. Do not place it on a moveable cart that could tip over. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or bypassed. Avoid direct exposur

12、e to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the player; leave all servicing to qualified service personnel. WARNING! To reduce the risk of electrical shock, fires, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose the unit to rain or

13、moisture. 3. Do not touch the power cord or plug with wet hands. RCD-961 Stereo Compact Disc Player RadioFans.CN 收音机爱 好者资料库 3 Figure 1: Controls and Connections Commandes et branchements Bedienelemente und Anschlsse Comandi E Collegamenti Controles y Conexiones 13456 101 112131415161718 2789 192021

14、Figure 2: RR-D94 Remote Control Tlcommande RR-D94 Fernbedienung RR-D94 Comando A Distanza RR-D94 Mando a Distancia RR-D94 OPN/CLS 123 456 7 0 89 TIME CLEAR PROG REV PAUSESTOPPLAY REPEAT RANDOM SCAN TRACK SEARCH RR-D94 10 A C E D FF L M N K G H I J B English RadioFans.CN 收音机爱 好者资料库 4 ROTEL RA-1070 RO

15、TEL RCD-961 RIGHT AUX 1 DVD /VIDEO TUNER CD PHONO TAPE 2 IN OUT TAPE 1 IN OUTLEFT 12 PRE OUT RIGHTAUX 2 LEFTRIGHTLEFT IN EXT REMIR OUT12V TRIGGER OUT COMPUTER I/O SWITCHED 200W MAX. 1212 INTEGRATED AMPLIFIER MODEL NO. RA-1070 POWER CONSUMPTION: 400W LEFT SPEAKERS A RIGHTLEFT SPEAKERS B RIGHT SPEAKER

16、 IMPEDANCE A AND B 8 OHMS MINIMUM A OR B 4 OHMS MINIMUM WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOTEXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE Figure 3: Analog Outputs Sorties analogiques Analoge Ausgnge Uscite Analogiche Salidas Analgicas Figure 4: Digtial Outputs Sorties numrique

17、s Digitalausgang Uscite Digitali Salidas Digitales ROTEL RA-1070 ROTEL RCD-961 RIGHT AUX 1 DVD /VIDEO TUNER CD PHONO TAPE 2 IN OUT TAPE 1 IN OUTLEFT 12 PRE OUT RIGHTAUX 2 LEFTRIGHTLEFT IN EXT REMIR OUT12V TRIGGER OUT COMPUTER I/O SWITCHED 200W MAX. 1212 INTEGRATED AMPLIFIER MODEL NO. RA-1070 POWER C

18、ONSUMPTION: 400W LEFT SPEAKERS A RIGHTLEFT SPEAKERS B RIGHT SPEAKER IMPEDANCE A AND B 8 OHMS MINIMUM A OR B 4 OHMS MINIMUM WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOTEXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE OPTI ANALOG OUTPUT R L COAX DIGITAL INPUT D/A CONVERTER RCD-961 Stereo C

19、ompact Disc Player 5 About Rotel A family whose passionate interest in music led them to manufacture high fidelity compo- nents of uncompromising quality founded Rotel over 40 years ago. Through the years that passion has remained undiminished and the family goal of providing exceptional value for a

20、udiophiles and music lovers regardless of their budget, is shared by all Rotel employees. The engineers work as a close team, listen- ing to, and fine tuning each new product until it reaches their exacting musical standards. They are free to choose components from around the world in order to make

21、that product the best they can. You are likely to find ca- pacitors from the United Kingdom and Ger- many, semi conductors from Japan or the United States, while toroidal power transform- ers are manufactured in Rotels own factory. Rotels reputation for excellence has been earned through hundreds of

22、 good reviews and awards from the most respected reviewers in the industry, who listen to music every day. Their comments keep the company true to its goal - the pursuit of equipment that is musi- cal, reliable and affordable. All of us at Rotel, thank you for buying this product and hope it will br

23、ing you many hours of enjoyment. Getting Started Thank you for purchasing the Rotel RCD-961 Stereo Compact Disc Player. Its precision trans- port is back up by an 18-bit equivalent, multi- level Delta-Sigma D/A converter with 8x oversampling and HDCD. These features, combined with Rotels Balanced De

24、sign, en- sure the RCD-961 will deliver the highest level of audio performance. When used in a high- quality audio system, your Rotel CD player will provide years of enjoyment. A Few Precautions Please read this manual carefully. In addition to installation and operating instructions, it pro- vides

25、valuable information on various RCD-961 system configurations as well as general infor- mation that will help you get optimum perfor- mance from your system. Please contact your authorized Rotel dealer for answers to any quesions you might have. In addition, all of us at Rotel welcome your questions

26、 and comments. Save the RCD-961 shipping carton and all enclosed packing material for future use. Shipping or moving the RCD-961 in anything other than the original packing material may result in severe damage that is not covered by the warranty. Fill out and send in the owners registration card pac

27、ked with the RCD-961. Also be sure to keep the original sales receipt. It is your best record of the date of purchase, which you will need in the event warranty service is re- quired. Placement Use common sense when placing the RCD-961 in a cabinet or when stacking other equip- ment. Make sure that

28、the shelf or cabinet can support its weight. Do not stack heavy com- ponents on top of the RCD-961. Avoid plac- ing the unit where it may be subject to excessive heat such as on top of a large power ampli- fier or near a heat register. For best perfor- mance, avoid placing the unit where it may be s

29、ubject to vibration, such as near a speaker. Control Identification The cover of this manual has a fold out panel that shows illustrations of the front and rear panels and the RR-D94 remote control. Each item in the illustrations is identified with a call out in a gray box. Through out this manual t

30、he items refered to in the text are identified by the corresponding call out. The items on the front and rear panels are identified with a number call out, such a . The items on the remote control are labeled with a letter call out, such as . Contents Figure 1: Controls and Connections3 Figure 2: RR

31、-D94 Remote Control3 Figure 3: Analog Outputs4 Figure 4: Digtial Outputs4 About Rotel . 5 Getting Started . 5 A Few Precautions5 Placement5 Control Identification5 AC Power and Control . 6 AC Power Input 6 Power Switch and Power Indicator 6 Output Connections . 6 Analog Outputs 6 Digital Output 6 Op

32、eration . 6 Infrared Remote Control 6 Display 6 Disc Drawer 6 Transport Control Buttons . 7 OPEN/CLOSE Button 7 PLAY Button 7 STOP Button 7 PAUSE Button 7 TRACK Buttons 7 DIRECT ACCESS Buttons 7 SEARCH Buttons 7 Additional Features . 7 HDCD 7 PROGRAM Button 8 REVIEW Button 8 CLEAR Button 8 RANDOM Bu

33、tton 8 REPEAT Button 8 SCAN Button 8 TIME Button 9 Troubleshooting. 9 Power Indicator Is Not Lit9 Fuse Replacement9 No Sound9 Specifications . 9 , HDCD, High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the Unite

34、d States and/or other countries.HDCD system manufactured under license from Pacific Microsonics, Inc. This product is covered by one or more of the following: In the USA: 5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,872,531 and in Australia: 669114. Other patents pending. Engl

35、ish 6 AC Power and Control AC Power Input Your RCD-961 is configured at the factory for the proper AC voltage in the country where you purchased it (either 115 volts or 230/ 240 volts. The AC line configuration is noted on a decal on the back panel. Note: Should you move your CD player to another co

36、untry, it may be possible to reconfigure it for use on a different line voltage. Do not attempt to perform this conversion yourself. Opening the enclosure of the RCD-961 exposes you to dangerous voltages. Consult a qualified service person or the Rotel factory service department for information. The

37、 RCD-961 should be plugged directly into a 2-pin polarized wall outlet or into the switched outlet on another component in your audio system. Do not use an extension cord. Be sure the power switch on the front panel of the RCD-961 is turned off (in the “out” position). Then, connect the supplied pow

38、er cord to the AC power receptacle on the rear of the unit and the AC power outlet. If you are going to be away from home for an extended period of time such as a month- long vacation, it is a sensible precaution to unplug your CD player (as well as other au- dio and video components) while you are

39、away. Power Switch and Power Indicator The power switch is located on the front panel of your CD player. To turn the CD player on, push the switch in. The LED indicator above the switch and the Display will light up, indi- cating that the CD player is turned on. To turn the CD player off, push the b

40、utton again and return it to the “out” position. Note: If you are using a switched outlet to turn on and off your CD player, you should leave the power switch in the “on” position. When AC power is applied to the unit, it will power up in fully active mode. Output Connections The RCD-961 gives you a

41、 choice of two dif- ferent kinds of output connections an analog output signal from the built-in D/A converter for use with conventional analog audio com- ponents and a coax digital output which pro- vides an unprocessed digital data signal for use with outboard D/A converters or digital processors.

42、 Note: To prevent loud noises that neither you nor your speakers will appreciate, make sure the CD player is turned off when you make any signal connections. Analog Outputs See Figure 3 for wiring illustration A pair of standard RCA jacks supplies an analog output signal from the RCD-961 to the sour

43、ce inputs of an audio preamplifier, in- tegrated amplifier, or receiver. Select high quality audio interconnect cables. Connect the left channel output of the RCD-961 to the left channel source input on the pream- plifier or other component. Connect the right output of the RCD-961 to the right chann

44、el source input on the preamplifier or other com- ponent. Digital Output See Figure 4 for wiring illustration If you are using an outboard D/A converter or other digital processor, you will need an unprocessed digital data stream from the RCD-961, taken before the built-in D/A con- verter. This sign

45、al is supplied by the RCD-961s back-panel digital output jack. Using a stan- dard 75 ohm coax digital cable, connect the RCD-961s coax digital output to the coax digital input connector on the outboard D/A converter. Operation The RCD-961 can be operated using its front panel buttons or from corresp

46、onding buttons on the supplied infrared remote control. Spe- cific instructions for each of these controls are detailed below. Most of the buttons are du- plicated on the front panel and on the IR re- mote control. However, there are a few ex- ceptions where the buttons are only available on one or

47、the other. These exceptions are noted in the instructions. Infrared Remote Control Before using the IR remote control, it is nec- essary to install two “UM-4/AAA” batteries (supplied). Remove the plastic cover on the back of the IR remote, install the batteries (ob- serving the + and polarity indica

48、tions), and reinstall the cover. To use the IR remote control, aim it at the IR sensor located in the Display area on the front panel of the RCD-961. Display A lighted Display on the front panel of the RCD-961 provides useful information about the status of the unit, activation of special features, and track/time information for the disc being played. Each of these indicators is described in the detailed operating instruc- tions that follow. Disc Drawer A motor-driven disc drawer, located in the center of the RCD-961, slides out to accept a compact disc and retrac