Rotel-RDG-1520-OM 电路图 维修手册.pdf

《Rotel-RDG-1520-OM 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Rotel-RDG-1520-OM 电路图 维修手册.pdf（146页珍藏版）》请在收音机爱好者资料库上搜索。

1、Owners Manual Manual de Instrucciones Manuel de lutilisateur Bedienungsanleitung Gebruiksaanwijzing Manuale di istruzioni Instruktionsbok RDG-1520 Digital Gateway Puerta de Acceso Digital Passerelle numrique Digital Gateway/Multimedialer Tuner Digitale Internetradio FM/DAB-tuner Digital Gateway Digi

2、tal Gateway QUEUE PLAY BACKREPLY SKIP - PAUSESTOP NETWORKUSBAUX SKIP + RDG-1520 123 456 789 MEMORY0DABi-RADIOFM POWER PUSH SELECT RDG1520_ENG_SPA_FRE_GER_DUT_ITA_RUS_SWE.indb 127/8/10 13:07:21 RadioFans.CN 收音机爱 好者资料库 2 RDG-1520 DIGITAL GATEWAY Rotel products are designed to comply with international

3、 directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordan

4、ce with these directives. This symbol means that this unit is double insulated. An earth connection is not required. DAB RDG1520_ENG_SPA_FRE_GER_DUT_ITA_RUS_SWE.indb 227/8/10 13:07:22 RadioFans.CN 收音机爱 好者资料库 3 English WARNING: There are no user serviceable parts inside. Refer all servicing to qualif

5、ied service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not expose the unit to dripping or splashing. Do not place objects filled with liquids, such as vases, on the unit. Do not allow foreign objects to get into the enclosure. If

6、 the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs. Read all the instructions before connecting or operating the component. Keep this manu

7、al so you can refer to these safety instructions. Heed all warnings and safety information in these instructions and on the product itself. Follow all operating instructions. Clean the enclosure only with a dry cloth or a vacuum cleaner. Do not use this unit near water. You must allow a minimum 10 c

8、m or 4 inches of unobstructed clearance around the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation openings. If the unit is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper cooling. Keep the component away

9、from radiators, heat registers, stoves, or any other appliance that produces heat. WARNING: The rear panel power cord connector is the mains power disconnect device. The apparatus must be located in an open area that allows access to the cord connector. The unit must be connected to a power supply o

10、nly of the type and voltage specified on the rear panel. (USA: 120 V/60Hz, EC: 230V/50Hz) Connect the component to the power outlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplied cable. A polarized plug has two blades, with one wider than the other. A gr

11、ounding plug has two blades plus a third grounding prong. These are provided for your safety. Do not defeat grounding and/or polarization safety provisions. If the supplied plug does not fit your outlet, please consult an electrician for replacement of the obsolete outlet. Do not use extension cords

12、. The main plug of the power cord set is a disconnect device of the apparatus. In order to completely disconnect the apparatus from the supply mains, the main plug of the power cord set should be unplugged from the mains (AC) outlet. The stand-by LED indicator will not be lit up to show the power co

13、rd is unplugged. The disconnect device shall remain readily operable. Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and where the cord exits the back of the unit. The power cord shou

14、ld be unplugged from the wall outlet during a lightning storm or if the unit is to be left unused for a long period of time. Use only accessories specified by the manufacturer. Use only with a cart, stand, rack, bracket or shelf system recommended by Rotel. Use caution when moving the unit in a stan

15、d or rack to avoid injury from a tip-over. Immediately stop using the component and have it inspected and/or serviced by a qualified service agency if: Thepowersupplycordorplughasbeendamaged Objectshavefallenorliquidhasbeenspilledintotheunit Theunithasbeenexposedtorain Theunitshowssignsofimproperope

16、ration Theunithasbeendroppedordamagedinanyway The batteries in remote control shall not be exposed to excessive heat such as sunshine, fire or the like. Important Safety InstructionsNotice The COMPUTER I/O connection should be handled by authorized persons only. FCC Information This equipment has be

17、en tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency ener

18、gy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recepti

19、on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorientorrelocatethereceivingantenna.(TV,radio,etc.) Increasetheseparationbetweentheequipmentandreceiver Connecttheequipmenttoanoutlet

20、oncircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforadditionalhelp. Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following to conditions: (1) This device may not cause harmful interference, and (2) t

21、his device must accept any interference received, including interference that may cause undesired operation. NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or antenna installers attention to Article 820-40 of the NEC. This provides guidelines for proper grounding and, in particular , specifi es

22、 that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. See installation diagram. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

23、 These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio or TV communications. Th

24、ere is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures: Reorie

25、ntorrelocatethereceivingantenna. Increasetheseparationbetweentheunitandthetelevisiontuner. ConnecttheunittoanACpoweroutletonadifferentelectricalcircuit. ConsultyourauthorizedRotelretailerforassistance. RDG1520_ENG_SPA_FRE_GER_DUT_ITA_RUS_SWE.indb 327/8/10 13:07:23 RadioFans.CN 收音机爱 好者资料库 4 RDG-1520

26、DIGITAL GATEWAY Figure 1: Controls and Connections RR-CX92 123 456 789 0MEM FMDABi-RADIOCD NETWORKUSBAUX QUEUE DIM BACKREPLY SETUP EXIT SEL ON OFF REPTRANDOM 1 0 9 - 4 5 8 = 7 QUEUE PLAY BACKREPLY SKIP - PAUSESTOP NETWORKUSBAUX SKIP + RDG-1520 123 456 789 MEMORY0DABi-RADIOFM POWER PUSH SELECT 1324 5

27、 6 7 809- =q wertyuio Front and Remote common function buttons 1,2 : Power on/off buttons 3 : iPod/mp3 USB slot 4,5 : Set and call out preset 6 : Display 7 : Music source select 8 : Playback button 9 : Queue ( Radio preset list ) 0 : Back to upper level menu - : iRadio menu = : Previous /Next track

28、q SEL : Navigate and Select Rear Slots w : FM/DAB Antenna e : Wi-Fi/Ethernet dongle slot r : Analogue output t : Digital Input y : Computer I/O u : Ext remote In i : 12v Trigger signal o : Power mains connection Remote Unit advanced buttons SETUP we will deal with access to your network first. Netwo

29、rk access The installation of computer networks are beyond the scope of these notes, so we assume that you have a working Wi-Fi network in your home. If you are using a wired network please refer to Network Config. under “Settings Overview” section. (Wired networks will provide the most reliable Eth

30、ernet streaming. Ethernet over powerline adaptors are available from 3rd parties if running an Ethernet cable is otherwise impractical) At start-up, the unit looks for Wi-Fi networks, and once the search has been completed you will find one or more listed networks listed in the display to choose fro

31、m. You need to select the network name which applies to your installation. This will have been assigned when your network was installed and is often pre-allocated by the router central to your network. The next requirement is to enable your tuner to log-on to your network and you allow this by enter

32、ing the wireless WEP key (or WPA, WPA2 key) appropriate to your network. It is likely that you will have used the key code when setting up a computer to log onto your network and it is often contained in the instructions for your router. This is a first-time only setting, so just carefully scroll th

33、ough the alpha-numeric characters selecting the correct upper or lower case characters to create your WEP key. When completed, scroll through to and select END or simply press the REPLY key on the front panel. You can use the Previous and Next keys of the handset to help you enter this information.

34、Do not confuse the letter O with the numeral 0. When successfully logged on to your network, the tuner will automatically log in to the website where you to be able to select the area of the world that interests you and choose radio stations by country, genre and name. Registering the radio at will

35、allow you to search for and save internet radio stations, as well as set up other music services when available for your region. The Rotelradio website managing your stations Managing the thousands of radio stations available via the internet would be impossible without being able to organise and ma

36、nage stations to suit your particular needs. Rotel have provided an easy way to accomplish this by means of a dedicated website where you can pre-select stations. The URL for this site is . Like many websites you will need to register a user name and password in order to create an account on the sit

37、e. Before you can do so, you will need to register the product on the site and there is a special registration key in the Rotel which you will need to copy to the website registration form. This registration key will be found under the settingsregister menu. You need to be connected to the internet

38、to access this one time only key. After registration, the website will show the radio serial number of your Rotel unit. This is different from the serial number of your Rotel unit. The radio serial number can be found in the menu of the Rotel unit under Settings - Version. Note that to update the di

39、splay of the Rotel to indicate your choices, you will need to power-cycle and re-select internet radio. Your new list of My Stuff will be updated automatically. Playback from iPods, mp3 players and flash drives Most iPod and mp3 players can be plugged into the USB socket on the front panel to replay

40、 the music files stored within. The display will update to show the file structure and will list the files which can be played. Files copied to a standard flash drive will also behave in the same way. Playback from network servers Music playback from computers configured as music servers provides an

41、other opportunity to link replay via the Rotel unit and thus make use of the audiophile decoding stages designed into these products. As with internet radio, a prerequisite is a working network, plus the music server connected to it. A server will have been configured to share files and methods of a

42、chieving this with appropriate software are shown under Media Player Quick Start later in this manual. RDG1520_ENG_SPA_FRE_GER_DUT_ITA_RUS_SWE.indb 727/8/10 13:07:24 8 RDG-1520 DIGITAL GATEWAY Getting Started Thank you for purchasing the Rotel Digital Gateway. When used in a high-quality music or ho

43、me theater system, your Rotel Digital Gateway will provide years of musical enjoyment. Features Wireless or wired connection to access internet radio. Access LAN PCs and music with Media Player Mode Connect with iPod/MP3/media music player for home enjoyment. Listen to DAB, FM broadcasting station A

44、 Few Precautions Please read this manual carefully. In addition to basic installation and operating instructions, it provides valuable information on various system configurations as well as general information that will help you get the optimum performance from your system. Please contact your auth

45、orized Rotel dealer for answers to any questions you might have. In addition, all of us at Rotel welcome your questions and comments Save the shipping carton and all enclosed packing material for future use. Shipping or moving the unit in anything other than the original packing material may result

46、in severe damage to your unit and void the warranty. Fill out and send in the owners registration card packed with the unit. Also be sure to keep the original sales receipt. It is your best record of the date of purchase, which you will need in the event warranty service is ever required. Placement

47、Place the unit on a solid, level surface away from sunlight, heat, moisture, or vibration. Dont stack other components or objects on top of the unit. Dont let any liquid fall into the unit. Note the weight and size of the unit. If placing the unit on a shelf, cabinet or rack, make sure the full weig

48、ht of the unit can be supported. The unit generates heat during normal operation. Do not block ventilation openings. Allow a minimum of 10 cm or 4 inches of unobstructed space around the unit. If installed in a cabinet, make sure that there is adequate ventilation. AC Power and Control AC Power Inpu

49、t o Your unit is configured at the factory for the proper AC line voltage in the country where you purchased it (USA: 120 volts/60 Hz, Europe: 230 volts/50 Hz). The AC line configuration is noted on a label on the back panel. The unit is supplied with the proper AC power cord. Use only this cord or an exact equivalent. Do not modify the supplied cord. Do not use an extension cord. Be sure the power switch on the front panel is turned off. Then, plug one end of the cord into the AC power connector on the back panel of the amplifier. Plug the other end in