Rotel-RLC-1080-OM 电路图 维修手册.pdf

《Rotel-RLC-1080-OM 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Rotel-RLC-1080-OM 电路图 维修手册.pdf（16页珍藏版）》请在收音机爱好者资料库上搜索。

1、RLC-1080 Power Conditioner Owners Manual To register your purchase now, go to RadioFans.CN 收音机爱 好者资料库 2RLC-1080 Power Conditioner Place the unit on a fixed, level surface strong enough to support its weight. Do not place it on a moveable cart that could tip over. Important Safety Information WARNING

2、: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, be sure that the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on

3、 the apparatus. Do not use this product in an environment where the relative humidity may exceed 95% (non-condensing). Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from t

4、he wall. Take the unit to a qualified service person for inspection and necessary repairs. Read all the instructions before connecting or operating the component. Keep this manual so you can refer to these safety instructions. Heed all warnings and safety information in these instructions and on the

5、 product itself. Follow all operating instructions. Unplug this device from the wall outlet before cleaning. Clean the enclosure only with a dry cloth or a vacuum cleaner. Note: A product that is meant for uninterrupted service and for some specific reason, such as the possibility of the loss of an

6、authorization code for a cable TV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging this device. You must allow 10 cm or 4 inches of unobstructed clearance around the unit. Do not place the unit on a bed, sofa, rug, or s

7、imilar surface that could block the ventilation slots. If the component is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper cooling. Keep the component away from radiators, heat registers, stoves, or any other appliance that produces heat. The unit must be co

8、nnected to a power supply only of the type and voltage specified on the rear panel of the unit. Do not use a plug adapter which defeats the ground pin of the AC plug. Connect the component to the power outlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplie

9、d cable in any way. Do not attempt to defeat grounding and/or polarization provisions. Do not use extension cords. Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and

10、where it exits the back of the unit. After connecting other devices to this device, do not push the rear of the device up against any surface (wall or shelving unit), as this may create an undesired bend in the power cords which may break the wire strands of the cord. Although this device provides p

11、rotection against electrical surges, when connecting an outside antenna or cable system to devices connected to this device, ensure the antenna or cable system is grounded so as to provide additional protection against voltage surges and static charges in accordance with Section 810 of the National

12、Electric Code, ANSI/NFPA No.70 (see illustration). This device provides a grounding lug at the rear panel for grounding the device to an external Transient Voltage Surge Suppression (TVSS) device. Ensure this connection is made in accordance with the instructions provided by the TVSS device. This de

13、vice employs Metal Oxide Varisters (MOVs), and other circuitry to protect against lightning and other sources of voltage surges and sags. It is not necessary to turn this device or the devices connected to this device, off during a lighting storm. Do not locate outside antenna systems near overhead

14、power lines, or other electric light or power circuits, or where it may fall or otherwise come in contact with these power sources. Do not allow the ladder being used, or the antenna itself to come into contact with these power sources, as such contact may be fatal. Do not overload the wall outlet w

15、here this device is being connected. Do not overload this device. Ensure the total load to this device does not exceed that which is listed in the Specifications section of this manual. Inspect the line cords. telephone/data cords, or DSS/Cable TV coaxial cables connected to this device to ensure th

16、ey remain fully pushed in or attached, and that they are not frayed or otherwise damaged. Immediately stop using the component and have it inspected and/or serviced by a qualified service agency if: The power supply cord or plug has been damaged. Objects have fallen or liquid has been spilled into t

17、he unit. The unit has been exposed to rain. The unit shows signs of improper operation The unit has been dropped or damaged in any way Federal Communications Commission (FCC) Compliance Information This device complies with Part 68 and Part 15 of the FCC rules. Operation is subject to the following

18、two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. As required, the bottom of this equipment contains, among other information, the Registration Number and Ringer E

19、quivalence Number (REN) for this equipment. If requested, this information must be provided to the telephone company. Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste

20、 Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives. RadioFans.CN 收音机爱 好者资料库 3English Front and Rear Panel Controls and Connections RadioFans.CN 收音机爱 好者资

21、料库 4RLC-1080 Power Conditioner About Rotel A family whose passionate interest in music led them to manufacture high fi delity components of uncompromising quality founded Rotel over 45 years ago. Over the years that passion has remained undiminished and the goal of provid- ing exceptional value for

22、audiophiles and music lovers regardless of their budget, is shared by all Rotel employees. Rotels reputation for excellence has been earned through hundreds of good reviews and awards from the most respected reviewers in the industry, who listen to music every day. Their comments keep the company tr

23、ue to its goal the pursuit of equipment that is musical, reliable and af- fordable. All of us at Rotel thank you for buying this product and hope it will bring you many hours of enjoyment. Getting Started Thank you for purchasing the Rotel RLC-1080 Power Conditioner. When used in a high-quality musi

24、c or home theater system, your Rotel power conditioner will protect your high performance audio and video components from damaging power surges, spikes and lightning, as well as power outages. Protection is guaranteed. Isolated noise fi lter banks and automatic voltage regula- tion will eliminate po

25、wer as a source of audio and video signal degradation. Pure sine wave battery backup power will prevent interruptions, lost pre-sets, missed DVR recordings and lost media server data when the power goes out. Data-line surge protection jacks will stop surges traveling over phone or data lines. Digita

26、l satellite system, cable modem, and CATV coaxial cable lines are equally protected. With the RLC-1080 you can enjoy your home theater experience with the peace of mind that performance is optimized and protection is guaranteed. Contents Important Safety Information .2 Front and Rear Panel Controls

27、and Connections 3 About Rotel .4 Getting Started .4 Features 5 Parts List 5 A Few Precautions .5 Power Capacity 5 Placement 5 Front Panel .6 ON BATTERY Status Indicator 1 6 DELAYED 1 Status Indicator 2 6 DELAYED 2 Status Indicator 3 6 REGULATING Status Indicator 4 6 Vacuum Fluorescent Display 5 6 OV

28、ERLOAD Status Indicator 6 6 FILTERING Status Indicator 7 6 LINE OK Status Indicator 8 6 LOW BATTERY Status Indicator 9 6 STATUS Button 0 6 SETUP Button - 6 On/Off Switch = 6 Up and Down Arrow Buttons qw 6 Removable Support Feet e 6 Rear Panel .7 AC-Power Outlets r 7 EXTERNAL BATTERY Connector t 7 Co

29、oling Fan y 7 Surge Protected COAX/RF Connectors u 7 CIRCUIT BREAKER i 7 SYSTEM GROUND Screw o 7 DATA PORT Jack (USB) p 7 Surge Protected Telephone Jacks 7 ETHERNET Surge Protected Jacks 7 DC TRIGGER Jacks 7 Input Power Connector a 7 BUILDING WIRING FAULT Indicator s 7 Installation .8 Placement 8 Ra

30、ck Mounting 8 Connecting the Battery .8 System Test .8 Status Screens .9 Status Screens 9 INPUT VOLTAGE: XXXV OUTPUT VOLTAGE: XXXV 9 SYSTEM LOAD: XXXWLOAD: XXXV Setting 11 GO TO BATTERY IF XXXV Setting 11 OUTLET DELAY1 and OUTLET DELAY2 Setting 11 LOWBATTWARNING: XMIN Setting 11 BATREPDATE: XX/XX/XX

31、 Setting 11 DO QUIK SELFTEST Screen 11 DO RUNTIME CAL Screen 12 DISPLY-BEEP TEST Screen 12 SCREEN SAVER: ON/OFF Screen 12 RESET TO DEFAULT: YES/NO Setting 12 Setting Default Screen 12 Troubleshooting .12 The RLC-1080 will not turn on 12 Connected equipment reboots or turns off when the RLC-1080 swit

32、ches to battery power. 13 Replace Battery LED is illuminated. 13 Limited Warranty .13 Specifi cations .14 5English Features Pure Sine Wave Battery Backup - The RLC-1080 provides battery backup power to maintain pure, uninterrupted power for your home theater and automation systems in the event of a

33、power blackout. Battery backup power not only prevents interruptions in your entertainment, it also prevents lost pre-sets, lost multi-media server data, damaged hard drives, and premature projector bulb wear and tear. Automatic Voltage Regulation (AVR) - The RLC-1080 is unique in that it provides a

34、utomatic voltage regulation, which is engaged to correct low and high voltage conditions. All equipment connected to the RLC-1080 is protected against these undesired voltage fluctuations, thus prolonging the life of the equipment. Low voltage conditions can also negatively impact video quality. Con

35、sequently this feature may help improve picture quality if power line voltage is low. Surge Protection - The RLC-1080 provides guaranteed protection against damaging surges, spikes and even lightning. It not only provides protection from surges from AC power lines, it also protects against surges fr

36、om system data lines including COAX, telephone and Ethernet lines. With the RLC- 1080 all your equipment is protected. Isolated Noise Filter Banks - The RLC-1080 eliminates electromagnetic and radio frequency interference (EMI/RFI) that, when severe enough, can negatively impact sound and video qual

37、ity. Each filter bank is electrically isolated from each other to prevent noise generated by one component from polluting other connected components. This noise filtering lets your system perform to its maximum capabilities. DC Trigger - When connected to a com- ponent that provides a DC trigger, th

38、at component controls the turning on and off, as well as sequencing of the delayed outlet banks. The RLC-1080 also allows that DC signal to pass through to another connected component. Rack-mountable - Rack-mount hardware is included to mount the unit into any 4-post, 19” rack. Sequenced Turn ON/OFF

39、 - This feature ensures that connected equipment is powered- up/down in the proper order and with the right amount of delay between the stages. It allows the user to program a delay into the sequence of from 0 to 10 seconds. This delay eliminates transients that can affect connected components or ca

40、use the building circuit breaker to trip. Parts List The RLC-1080 Power Conditioner includes the parts listed below. If any items are missing, please contact your authorized Rotel dealer. 1 Power Conditioner with Battery Backup (bat- tery pack included) 1 Front Display Panel (Bezel) 1 Input Power Co

41、rd 3 Coaxial Patch Cables 1 DC Trigger Cable 1 PowerChute Personal Edition Software CD 1 USB Interface Cable 1 Telephone Patch Cable 1 Ethernet Patch Cable 1 User Manual 1 Equipment Protection Policy Sheet 1 Warranty Card 1 Rack-mount Kit (2 rails, 2 ear brackets, screws, and instruction sheet) A Fe

42、w Precautions Please read this manual carefully. In addition to installation and operating instructions, it also provides important safety information. It is very important that you have read and understand all of the safety information located at the front of this manual. If you have any questions

43、about the safety information, or are concerned that your home may not be properly wired for this equip- ment, please contact a qualifi ed and licensed electrician.Please contact your authorized Rotel dealer for answers to any questions you might have. In addition, all of us at Rotel welcome your que

44、stions and comments. Save the RLC-1080 shipping carton and pack- ing material for future use. Shipping or mov- ing the RLC-1080 in anything other than the original packing material may result in severe damage. Be sure to keep the original sales receipt. It is your best record of the date of purchase

45、, which you will need in the event warranty service is ever required. Power Capacity The RLC-1080 Power Conditioner is rated for 900 watts (continuous). It has been designed, however, to support current surges that are much higher than its continuous power rating. The RLC-1080 is capable of supplyin

46、g the dynamic peak current draws required by any component designed to work on a 15 amp circuit. Despite their nameplate power ratings, high performance A/V equipment draw much less than their listed power ratings. The RLC-1080 can inform the user how much of the power capacity is available as equip

47、ment is connected to the unit. Placement The RLC-1080 is quite heavy. Keep this in mind when selecting an installation location. Make sure that the shelf or cabinet can support its weight. Proper installation of your new Power Conditioner is important. If the unit is being mounted in a standard 19”

48、rack, refer to the instruction sheet provided in the box containing the slide rails. 6RLC-1080 Power Conditioner Front Panel See the illustration on page 3. ON BATTERY Status Indicator 1 When lit (orange), the RLC-1080 is operating on power from the internal Battery Pack. The unit will go “On Battery” when the voltage from the wall outlet has either dropped below or gone above th