Rotel-RSX-1057-OM 电路图 维修手册.pdf

《Rotel-RSX-1057-OM 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Rotel-RSX-1057-OM 电路图 维修手册.pdf（48页珍藏版）》请在收音机爱好者资料库上搜索。

1、Owners manual RSX-1057 Surround Sound Receiver II RadioFans.CN 收音机爱 好者资料库 2CH PLIIx MODE DTS Neo 6DSP MULTI INPUTMUTERECZONE CDTUNERTAPE1 SURROUND SOUND RECEIVER RSX-1057 STANDBY VIDEO1VIDEO2VIDEO3VIDEO5VIDEO4 67890DIRECTMEMORYMONO 12345TUNING VOLUME BAND 10 cm 4 in 10 cm 4 in 10 cm 4 in 10 cm 4 in

2、Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products

3、 must be appropriately recycled or processed in accordance with these directives. This symbol means that this unit is double insulated. An earth or ground connection is not required. RadioFans.CN 收音机爱 好者资料库 Notice The COMPUTER I/O connection should be handled by authorized person only. FCC Informati

4、on This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can ra

5、diate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to r

6、adio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.(TV, radio, etc.) Increase the separation between the equipment an

7、d receiver Connect the equipment to an outlet on circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for additional help. Caution This device complies with part 15 of the FCC Rules operation is subject to the following to condi- ti

8、ons: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or antenna installers attention to Article 820-40 of the NEC. This provid

9、es guidelines for proper grounding and, in particular, specifi es that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. See installation diagram. NOTE: This equipment has been tested and found to comply with the limits fo

10、r a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea- sonable protection against interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the ins

11、tructions, may cause interference to radio or TV communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, try to correc

12、t the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the unit and the television tuner. Connect the unit to an AC power outlet on a different electrical circuit. Consult your authorized Rotel retailer for assistance.

13、 Important Safety Instructions WARNING: There are no user serviceable parts inside. Refer all servicing to qualifi ed service personnel. WARNING: To reduce the risk of fi re or electric shock, do not expose the unit to mois- ture or water. Do not expose the unit to dripping or splashing. Do not plac

14、e objects fi lled with liquids, such as vases, on the unit. Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately discon- nect the power cord from the wall. Take the unit to a qualifi ed service person for

15、 inspection and necessary repairs. Read all the instructions before connecting or operating the component. Keep this manual so you can refer to these safety instructions. Heed all warnings and safety information in these instructions and on the product itself. Fol- low all operating instructions. Cl

16、ean the enclosure only with a dry cloth or a vacuum cleaner. Do not use this unit near water. You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ven- tilation openings. If the unit i

17、s placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper cooling. Keep the component away from radiators, heat registers, stoves, or any other appliance that produces heat. The unit must be connected to a power supply only of the type and voltage specifi ed on the

18、rear panel. (USA: 120 V/60Hz, EC: 230V/50Hz) Connect the component to the power outlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplied cable. A polarized plug has two blades, with one wider than the other. A grounding plug has two blades plus a third grou

19、nding prong. These are provided for your safety. Do not defeat grounding and/or polarization safety provisions. If the supplied plug does not fi t your outlet, please consult an electrician for replacement of the ob- solete outlet. Do not use extension cords. The main plug of the power cordset is a

20、disconnect device of the apparatus. In order to com- pletely disconnect the apparatus from the supply mains, the main plug of the power cordset should be unplugged from the mains (AC) outlet. The stand-by LED indicator will not be lit up to show the power cord is unplugged. Do not route the power co

21、rd where it will be crushed, pinched, bent, exposed to heat, or dam- aged in any way. Pay particular attention to the power cord at the plug and where the cord exits the back of the unit. The power cord should be unplugged from the wall outlet during a lightning storm or if the unit is to be left un

22、used for a long period of time. Use only accessories specifi ed by the manufacturer. Use only with a cart, stand, rack, bracket or shelf system recommended by Rotel. Use caution when moving the unit in a stand or rack to avoid injury from a tip-over. Use Class 2 wiring for speaker connections to ens

23、ure proper installation and minimize the risk of electrical shock. Immediately stop using the component and have it inspected and/or serviced by a qualifi ed service agency if: The power supply cord or plug has been damaged. Objects have fallen or liquid has been spilled into the unit. The unit has

24、been exposed to rain. The unit shows signs of improper operation The unit has been dropped or damaged in any way WARNING: The master power switch is located on the rear panel. The unit must be lo- cated in the open area allowing unobstructed access to the main power switch. RadioFans.CN 收音机爱 好者资料库 4

25、RSX-1057 Surround Sound Receiver 1: Controls and Connections II 5English 2: RR-1060 Remote 123 456 789 +100X CM SR ENT FRQ DIRECT MENUGUIDE TUNEPRESET FM MONOBAND CTR SUBSUR SEARCH-SEARCH+ OSD ONOFF SMTMUTE CHVOL POWER SMART MEM AUDCDTUNTAPEEXT V1V2V3V4V5 DEVICE / INPUT RR-1060 LIGHT DVD RESUME REPE

26、ATSLOWGOTOA - B INPUT 1INPUT 2RECORDTV/VCRINPUT 3 ASPECTDISPOUTPUTPOPPIP 123 456 789 +100X ONOFF SMTMUTE CM SR ENT FRQ DIRECT MENUGUIDE TUNEPRESET FM MONOBAND CTR SUBSUR SEARCH-SEARCH+ OSD CD DISC2DISC1DISC3DISC4DISC5 PROGRANDOM REPEATDISC-DISC+ DISPLAYAUDIOZOOMSBTITLEANGLE DISPTAPE2PHONOTONED-SLT E

27、QDYNRECZONESUR+ 2CHPL M5CH7CHPL C CHVOL POWER SMART MEM DIGESTOPENP-SCANTITLE SCANPTYP-TUNTPTA POWERSETUP Turn off the RSX-1057 and the entire system before making connections! 6RSX-1057 Surround Sound Receiver 3: Connecting the Speakers 7English 4: Digital Video Connections 8RSX-1057 Surround Sound

28、 Receiver 5: TV Analog Connections 6: DVD Player Analog Connections 9English 8: Cable, Satellite, or HDTV Analog Connections 7: DVD-A or SACD Player Connections 10RSX-1057 Surround Sound Receiver 9: VCR Analog Connections 10: CD Player/CDR Recorder Connections AUDIO OUTPUTS RIGHTLEFT ANALOGDIGITAL S

29、PEAKERS FRONT/CB/ZONE RIGHT/2 LEFT/1 SURROUND RIGHT LEFT ANTENNA OFF ON POWER CENTER Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956674, 5,974,380, 5,978,762, and other world-wide patents issued and pending. DTS, DTS - EX Extended Surround, and Neo:6 are tr

30、ademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX, and the double-D symbol are trademarks of Dolby Laboraties L

31、icensing Corporation. SURROUND SOUND RECEIVER MODEL NO. : RSX-1057 POWER CONSUMPTION: 450 WATTS Class 2 Wiring This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. 21321435INOUT VIDEO OUT DIGITAL INPUT HDMI INMO

32、NITOR OUT DIGITAL OUT VIDEO INTAPECD ZONE OUT COMPOSITE IN 23451 21 231 23451 S-VIDEO INS-VIDEO OUT 213 COMPUTER I/O COMPONENT VIDEO IN MON OUT YPBYPRPRPB 3 2 1 21 COAXIAL COAXIALOPTICAL 321 HDMI21 OPTICAL IR OUT 2ZONE1 12V TRIG OUT EXTZONE REM IN CB 1REAR LFRONT LSUB 1CENTER 1 CB 2REAR RFRONT RSUB

33、2CENTER 2 CB 1REAR LFRONT LCENTER CB 2REAR RFRONT RSUB L R MON OUT MON OUT ZONE OUT COMPOSITE OUT 11English 11: Audio Recorder Connections 12: AM and FM Antennae Connections SPEAKERS FRONT/CB/ZONE RIGHT/2 LEFT/1 SURROUND RIGHT LEFT ANTENNA OFF ON POWER CENTER Manufactured under license from Digital

34、Theater Systems, Inc. US Pat. No. 5,451,942, 5,956674, 5,974,380, 5,978,762, and other world-wide patents issued and pending. DTS, DTS - EX Extended Surround, and Neo:6 are trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. CAUTION RIS

35、K OF ELECTRIC SHOCK DO NOT OPEN Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX, and the double-D symbol are trademarks of Dolby Laboraties Licensing Corporation. SURROUND SOUND RECEIVER MODEL NO. : RSX-1057 POWER CONSUMPTION: 450 WATTS Class 2 Wiring This Class B d

36、igital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. 21321435INOUT VIDEO OUT DIGITAL INPUT HDMI INMONITOR OUT DIGITAL OUT VIDEO INTAPECD ZONE OUT COMPOSITE IN 23451 21 231 23451 S-VIDEO INS-VIDEO OUT 213 COMPUTER I/O COMPONEN

37、T VIDEO IN MON OUT YPBYPRPRPB 3 2 1 21 COAXIAL COAXIALOPTICAL 321 HDMI21 OPTICAL IR OUT 2ZONE1 12V TRIG OUT EXTZONE REM IN CB 1REAR LFRONT LSUB 1CENTER 1 CB 2REAR RFRONT RSUB 2CENTER 2 CB 1REAR LFRONT LCENTER CB 2REAR RFRONT RSUB L R MON OUT MON OUT ZONE OUT COMPOSITE OUT 12RSX-1057 Surround Sound R

38、eceiver 13: On-Screen Menus 13English Contents Boxed numbers refer to RSX-1057 illustration. Boxed letters refer to RR-1060 illustration. FCC Information .3 Caution .3 Important Safety Instructions .3 1: Controls and Connections .4 2: RR-1060 Remote .5 3: Connecting the Speakers .6 4: Digital Video

39、Connections .7 5: TV Analog Connections .8 6: DVD Player Analog Connections .8 7: DVD-A or SACD Player Connections .9 8: Cable, Satellite, or HDTV Analog Connections .9 9: VCR Analog Connections .10 10: CD Player/CDR Recorder Connections .10 11: Audio Recorder Connections .11 12: AM and FM Antennae

40、Connections .11 13: On-Screen Menus .12 About Rotel .15 Getting Started .15 Key Features .15 Unpacking .16 Placement .16 CONNECTIONS 16 Analog Audio Inputs however, S-Video connections typically provide better picture quality. Com- ponent Video or HDMI connections provide the best signal quality and

41、 are required for HDTV or progressive scanned DVD video. NOTE: The HDMI digital connections are compatible with DVI components with an appropriate DVI-D cable adapter. The RSX-1057 provides pass-through HDMI switching only. It will send an HDMI digital signal from a source component to the TV monito

42、r, but cannot convert any other type of video to HDMI output and cannot display its On Screen Menus on the HDMI output. When using the HDMI connections, it is al- most always necessary to also make connec- tions using one of the other types. Consider the following implications for your system confi

43、guration: On Screen Display: The RSX-1057 OSD system is available on the TV monitor, when using Composite, S-Video, or Component Video connections from the RSX-1057 outputs to the TV set. The OSD menus cannot be dis- played when using HDMI connections from the RSX-1057 to the TV monitor. NOTE: When

44、using a progressive scan or 1080i video signal from the Component Video out- puts of the RSX-1057, the TV monitor cannot display the video signal and the OSD menus at the same time. A “progressive” setting in the Other Options setup menu allows the use of the main OSD setup menus, even with progres- sive or HDTV signals. When the main OSD setup menus are a