Gemini-EX26-mix-sm维修电路图 手册.pdf

《Gemini-EX26-mix-sm维修电路图 手册.pdf》由会员分享，可在线阅读，更多相关《Gemini-EX26-mix-sm维修电路图 手册.pdf（12页珍藏版）》请在收音机爱好者资料库上搜索。

1、 SERVICE MANUAL Features, Operating Instructions.Page 2 Specifications.Page 3 DiagramsPage 4 Parts List.Page 7 Schematics.Page 12 EX-26 RadioFans.CN Congratulations on purchasing the Gemini EX-26 mixer! This state of the art mixer is backed by a three-year warranty, excluding crossfader and channel

2、slides. We know youre anxious to hook everything up and start mixing beats and cranking up the volume on those hot dance tracks, but we suggest reading this instruction manual first as there are really cool features on this mixer that we wouldnt want you to miss! The EX-26 Mixer features a crossfade

3、r which controls a super-quiet photo coupler to give you smooth operation and the cleanest possible sound, along with a hamster switch that is easily accessible on the front of the mixer. This “hamster” switch reverses the direction of the main crossfader. This mixer also features individual “hamste

4、r” switches for the separate channel input faders as well. For additional information, refer to the diagrams on pages 1 & 2 for crossfader adjustment and channel slide curve. 2 Stereo Channels State of the Art Cue Section 2 Phono & 2 Line Inputs Channel Slide Curve Control Crossfader with Curve Cont

5、rol Adjustable Input Assign Switches Crossfader Reverse (Hamster) Button Individual Channel Fader Reverse (Hamster) Buttons LED Display Gain, High, Mid and Low tone controls for each channel Balanced and Unbalanced Master Outputs Record outputs 1. All operating instructions should be read before usi

6、ng this equipment. 2. Treat this unit as you would any other piece of electrical equipment and use good common sense! 3. To reduce the risk of electrical shock, do not open the unit. There are NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service technician. INTRODUCTION FE

7、ATURES 4. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove. 5. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents. 6. When moving this equipment, it should be placed in its original carton and packaging. This will

8、 reduce the risk of damage during transit. 7. Do not expose this unit to rain or moisture. 8. Do not use any spray cleaner or lubricant on any controls or switches. Okay, lets hook everything up! 1. Make sure that the POWER (1) switch is in the “OFF” position. This unit comes supplied with a 15 volt

9、 AC adaptor. Plug the adaptor into the rear panel power jack. Then plug the adaptor into your power strip or outlet. 2. The EX-26 mixer is supplied with 3 sets of output jacks. The BALANCED MASTER OUTPUT (2) jacks are used to connect to your main amplifier using standard cables with 1/4” connectors.

10、 We recommend using the balanced amp outputs if the cables to your amp are 25 feet or more. BALANCED MASTER OUTPUTS have three separate conductors, two of which are signal (positive and negative) and one shield (ground). The balanced line uses a tip-ring- sleeve connection. Tip = hot or positive (+)

11、, ring = cold or negative (-), and sleeve = shield/ground. The MASTER OUTPUT (3) jacks are unbalanced and are also used to connect to your main amplifier. The REC OUTPUT (4) jacks can be used to connect the mixer to the record input of your recorder enabling you to record your mix. CAUTIONS In the U

12、.S.A., if you have any problems with this unit, call 1-732-738-9003 for customer service. Do not return equipment to your dealer. CONNECTIONS RadioFans.CN Page 2 3. On the rear panel are 2 stereo LINE (5,6) inputs and 2 stereo PHONO (7,8) inputs. The phono inputs will accept only turntables with a m

13、agnetic cartridge. GROUND SCREWS (9) for you to ground your turntables are located on the rear panel. The stereo line inputs will accept any line level input such as a CD player, cassette player, etc. 4. Headphones can be plugged into the front panel mounted PHONES (10) jack. 1. POWER ON: Once you h

14、ave made all the equipment connections to your mixer, press the POWER (1) switch. 2. CHANNEL 1: The GAIN (11), HIGH (12), MID (13), and LOW (14) controls allow you to fully adjust the volume and EQ of the sound source. The Channel 1 REVERSE SWITCH (15) allows you to reverse the direction of the Chan

15、nel 1 slide fader. (17) The Channel 1 SLIDE FADER (17) controls the input level of this channel. 3. CHANNEL 2: The GAIN (11), HIGH (12), MID (13), and LOW (14) controls allow you to fully adjust the volume and EQ of the sound source. The Channel 2 REVERSE SWITCH (16) allows you to reverse the direct

16、ion of the Channel 2 slide fader. (18 ) The Channel 2 SLIDE FADER (18 ) controls the input level of this channel. 4. EQ CONTROLS: There is Low, Mid and High equalization for each channel with an extremely wide range of adjustment. 5. INPUT ASSIGN SWITCHES: You can adjust the position of the INPUT AS

17、SIGN SWITCHES (21, 22) to move left to right, up and down, or at a 45 degree angle. Make these adjustments with the power OFF. 1) Remove the channel slide knobs, crossfader knobs and the 4 screws from the sides of the lower faceplate. Then remove the lower faceplate. 2) Remove the 2 screws in the co

18、rners of the assign switch plate. Rotate the switch plate to the desired position, and replace the screws and tighten down. 3) To position the switch at a 45-degree angle, you need to reposition the switch on the assign switch plate. First, remove the 2 screws in the corners of the assign switch pla

19、te. Then, lift the switch plate up and remove the 2 smaller screws next to the switch. Rotate the switch plate to the right until the 45-degree holes align with the switch holes, replace the screws and tighten down. Replace the switch plate and tighten down. NOTE: Keep track of where you position th

20、e input assign switches. OPERATION 6. CHANNEL SLIDE CURVE SWITCHES: Use the 3 position CHANNEL SLIDE CURVE SWITCHES (23,24) to adjust the kind of curve the channel slides have. Move the selected channel slide curve switch to the 6 (top) position to make the increase in level gradual and even. Move t

21、he channel slide curve switch to the 20 (center) position to make the increase in level less gradual as you move channel slide up. Move the channel slide curve switch to the 30 (bottom) position to make the increase in level even less gradual, especially at the top of the slide. 7. CROSSFADER SECTIO

22、N: The CROSSFADER (25) allows the mixing of one source into another. The left side of the CROSSFADER (25) is CHANNEL 1 and the right side is CHANNEL 2. The CROSSFADER CURVE CONTROL (26) allows you to adjust the kind of curve the crossfader has. Move the CROSSFADER CURVE CONTROL (26) to the right to

23、make the curve steep and cutting (perfect for scratching). Move the CROSSFADER CURVE CONTROL(26) to the left to make the curve gradual and gentle. The CROSSFADER REVERSE BUTTON (27) allows you to reverse the crossfader so that CHANNEL 2 is controlled by the left side of the crossfader and CHANNEL 1

24、is controlled by the right side of the crossfader. When REVERSE is activated the REVERSE LED (28) will light. NOTE: When the CROSSFADER REVERSE BUTTON is activated (depressed), only the crossfader reverses. The Channel Slides, Gain, and EQ controls do not reverse. 8. OUTPUT CONTROL SECTION: The leve

25、l of the MASTER OUTPUT (2, 3) is controlled by the MASTER CONTROL (20). The BALANCE CONTROL KNOB (19) controls the balance between the output of the left and right channels. NOTE: The RECORD OUT (4) has no level control. The level is set by the channel slides and the gain controls of the selected ch

26、annel. The EQ of the channels is set by the low, mid and high controls of that same channel. 9. CUE SECTION: By connecting a set of headphones to the PHONES JACK (10), you can monitor the music coming out of each channel separately or both channels together. Move the CUE FADER (29) to the left to he

27、ar CHANNEL 1 and to the right to hear CHANNEL 2. Move the CUE FADER (29) to the center to listen to both channels together. The PHONES MUTE BUTTON (30) will instantly mute your cue mix. 10. DISPLAY: The red LED in the center of the display tells you that the power in your EX-26 Mixer is on. The mult

28、i-colored LED DISPLAY (31) on either side of the center tells you the output level of your 2 channels. Okay, thats it! NOW youre ready to grab a couple of great CDs or records, crank it up and get the party started! RadioFans.CN INPUTS: Phono. 1mHz.2mV 47k Line.100mV 20k OUTPUTS: Master (balanced.0

29、dB 2 V 800 Max.40 V Peak to Peak Master (unbalanced).0 dB 1V 400 Max.20V Peak to Peak Rec.150mV 5k GENERAL: Low.+ 12dB/- 32 dB Mid.+ 12dB/- 32 dB High.+ 12dB/- 32 dB Gain. .0 to -20dB Frequency Response.20Hz 20kHz +/- 2dB Distortion.less than 0.08% S/N Ratio.better than 80dB Power Adapter.115V/15V A

30、C 0.5A 230V/15V AC 0.5A Dimensions.6.5”W x 14.25”H x 3.00”D SPECIFICATIONS Page 3 RadioFans.CN 16 31 21 22 2324 1718 28 25 1615 1414 1313 121219 111120 RadioFans.CN 1 223 3 4 4 5 5 7 7 99 6 6 8 8 26 27 29 30 10 CH 1 CH 2 CH 1 CH 2CH 1CH 2CH 1CH 2 CUE 1CUE 2CUE 1CUE 2 RadioFans.CN PART# QUANTITY NAME

31、 1012-0261PANEL CONTROL 2012-0271PANEL CONTROL 3024-1651PANEL FRONT 4034-1181PANEL REAR 5021-6011BRACKET VR 6032-1041COVER BOTTOM 7022-3743HOLDER FADER 8022-3762HOLDER SWING 9041-4511HEAT SINK 10 11023-6742KNOB SWING 12002-5311KNOB PUSH (SMALL) 13002-5321BUSHING FOR KNOB (SMALL) 14002-5803KNOB PUSH

32、15002-5813BUSHING FOR KNOB 16002-7283KNOB SLIDE (BIG) 17002-7271KNOB SLIDE (SMALL) 18 19003-14912KNOB ROTARY (A) 20148-31312KNOB INLAY (COP PER) 21 22003-7451BRIGHTENED ACRYLIC 23003-4361LIGHT PLATE ACRYLIC 24003-74615HOLDER LED 25003-9822HOLDER LED 5 26003-7471HOLDER LED 27049-1901CLIP WIRE 28049-2

33、064PAD FOOT 29146-7162GND SCREW (BIG) 30 31159-2162SWING DUST PROOF CLOTH 32159-1713VR DUST PROOF CLOTH 33159-1671VR DUST PROOF CLOTH (SMALL) 34 35196-1253SERIAL NO:LABEL 36255-1981GIFT BOX 37157-9941OWNERS MANUAL 38156-0891WARRANTY CARD 39153-2161POLYFORM 40153-2261POLYFOAM CUBE 41 42095-0573VDE LA

34、BEL 43099-1671A LABEL 44099-1691V LABEL 45099-1681J LABEL 46099-2322LABEL-GREEN 47099-2332LABEL-RED 48099-2342LABEL-YELLOW 49099-2661CAUTION LABEL 50 51099-0141LABEL - MADE IN TAIWAN 52099-2141LABEL-MADE IN CHINA 53 54190-0621SILICON GEL PARTS LIST RadioFans.CN 65 66170-3501MASTER CARTON 67 68099-23

35、02100V LABEL 74 75 1262-3231PRINTED CIRCUIT BOARD EX-26-1 2262-3241PRINTED CIRCUIT BOARD EX-26-2 3262-3251PRINTED CIRCUIT BOARD EX-26-3 4262-3192PRINTED CIRCUIT BOARD EX-18-4 5262-3201PRINTED CIRCUIT BOARD EX-18-5 6262-3261PRINTED CIRCUIT BOARD EX-26-6 7262-3271PRINTED CIRCUIT BOARD EX-26-7 8262-322

36、2PRINTED CIRCUIT BOARD EX-18-7 ( PC8) 9 10074-1095INTEGRATED CIR- CUIT NJM2068D (C4570C) 11074-1637INTEGRATED CIR- CUIT NJM4558DD (M5218A, BA15218) 12074-1131INTEGRATED CIR- CUIT NJM4556L 13074-0224INTEGRATED CIR- CUIT LB1403N (BA6124) 14 15074-1071INTEGRATED CIR- CUIT NJM7812FA 16074-1141INTEGRATED

37、 CIR- CUIT NJM7912FA 17 18076-0022SILICON TRANSIS- TORS 2SC945 19076-003SILICON TRANSIS- TORS OR 2SC1815 20076-0964POWER MOSFETS 2SK363 21 22079-5012PHOTO COUPLER P873-13 23079-00310SILICON DIODE 1N4148 24079-0272RECTIFIER DIODE 1N4002 25 26079-0122ZENER DIODE RD12EB2 (MTZ12B) 27079-0111ZENER DIODE

38、RD9.1EB2 (MTZ9.1B) 28 29059-1391AC ADAPTER AC120V 60Hz/AC15V 500mA 30059-1401AC ADAPTER AC230V 50Hz/AC15V 500mA 31059-1491AC ADAPTER AC240V 50Hz/AC15V 500mA 32059-1511AC ADAPTER AC100V 60Hz/AC15V 500mA 33 34083-0691PUSH SWITCH PHONO-ON, OFF 35083-0971PUSH SWITCH 36083-1192PUSH SWITCH 37083-1201POWER

39、 SWITCH UL 38 39081-0492SLIDE SWITCH 4P3C CH1,CH2 40082-0192LEVER SW 4P2C P=18 PH/LN SW 41072-1133SLIDE VR CH1,CH2, FADER 42072-0921SLIDE VR 30mm L=15 20KB2 43073-0314SEMI-FIXED VR B10K 67-5-5 44 45071-166 I4ROTARY VR 14(F) L=22.5 50KA2 GAIN, MASTER 46071-167 I6ROTARY VR L=22.5 50KE2C.C 47071-206 I1

40、ROTARY VR L=22.5 20KMN2C.C BAL- ANCE 48071-2241ROTARY VR L=22.5 250KC2 RadioFans.CN 49 50 51080-1065LED (RED) 3.15 52080-1032LED (YELLOW) 3.15 53080-1078LED (GREEN) 3.15 54080-1113LED (GREEN/RED) 3 55 56092-141G2PHONE JACK 6.3 57092-1411PHONE JACK 6.3 58092-1351DC JACK 2.5 59161-16534P RCA JACK 60 6

41、1066-518181/8 W CARBON FILM RESISTOR S 10 62066-52521/8 W CARBON FILM RESISTOR S 20 63066-53621/8 W CARBON FILM RESISTOR S 56 64 65066-54841/8 W CARBON FILM RESISTOR S 180 66066-55761/8 W CARBON FILM RESISTOR S 430 67066-55921/8 W CARBON FILM RESISTOR S 510 68066-56021/8 W CARBON FILM RESISTOR S 560

42、 69066-56321/8 W CARBON FILM RESISTOR S 750 70 71066-571101/8 W CARBON FILM RESISTOR S 1K 72066-57581/8 W CARBON FILM RESISTOR S 1.5K 73066-57781/8 W CARBON FILM RESISTOR S 1.8K 74066-58041/8 W CARBON FILM RESISTOR S 2.4K 75066-58141/8 W CARBON FILM RESISTOR S 2.7K 76066-584181/8 W CARBON FILM RESIS

43、TOR S 3.6K 77066-58741/8 W CARBON FILM RESISTOR S 4.7K 78066-58841/8 W CARBON FILM RESISTOR S 5.1K 79 80066-58961/8 W CARBON FILM RESISTOR S 5.6K 81066-59141/8 W CARBON FILM RESISTOR S 6.8K 82066-593121/8 W CARBON FILM RESISTOR S 8.2K 83066-59421/8 W CARBON FILM RESISTOR S 9.1K 84 85066-595201/8 W C

44、ARBON FILM RESISTOR S 10K 86066-60121/8 W CARBON FILM RESISTOR S 18K 87066-604121/8 W CARBON FILM RESISTOR S 24K 88066-607161/8 W CARBON FILM RESISTOR S 33K 89 90066-61141/8 W CARBON FILM RESISTOR S 47K 91066-61241/8 W CARBON FILM RESISTOR S 51K 92066-61421/8 W CARBON FILM RESISTOR S 62K 93066-61721

45、/8 W CARBON FILM RESISTOR S 82K 94 95066-619101/8 W CARBON FILM RESISTOR S 100K 96066-62161/8 W CARBON FILM RESISTOR S 120K 97066-62221/8 W CARBON FILM RESISTOR S 130K 98066-63621/8 W CARBON FILM RESISTOR S 510K 99066-65121/8 W CARBON FILM RESISTOR S 1M 100 101 051-0102CERAMIC CAPACI- TOR 10P/50V 10

46、2 051-0264CERAMIC CAPACI- TOR 47P/50V 103 051-0284CERAMIC CAPACI- TOR 56P/50V 104 051-03414CERAMIC CAPACI- TOR 100P/50V 105 RadioFans.CN 106 054-0062POLYESTER CAPACI- TOR 0.0027/50V 107 054-0104POLYESTER CAPACI- TOR 0.0056/50V 108 054-0114POLYESTER CAPACI- TOR 0.0068/50V 109 054-0124POLYESTER CAPACI

47、- TOR 0.0082/50V 110 054-0138POLYESTER CAPACI- TOR 0.01/50V 111 054-0184POLYESTER CAPACI- TOR 0.027/50V 112 054-0288POLYESTER CAPACI- TOR 0.15/50V 113 114 050-1252ELECTROLYTIC CAPACITOR 1/50V 115 050-02910ELECTROLYTIC CAPACITOR 10/16V 116 050-03610ELECTROLYTIC CAPACITOR 22/25V 117 050-0381ELECTROLYTIC CAPACITOR 33/16V 118 050-0434ELECTROLYTIC CAPACITOR 47/16V 119 050-0491ELECTROLYTIC CAPACITOR 100/ 16V 120 050-0882ELECTROLYTIC CAPACITOR 2200/ 25V 121 122 050-1962ELECTROLYTIC CAPACITOR MINI 48 0.1/50V 123 050-1304ELECTROLYTIC CAPACITOR MINI 48 4.7/50V 124 050-13310E