HarmanKardon-AVR2600-avr-sm维修电路原理图.pdf

《HarmanKardon-AVR2600-avr-sm维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《HarmanKardon-AVR2600-avr-sm维修电路原理图.pdf（216页珍藏版）》请在收音机爱好者资料库上搜索。

1、 harman/kardon AVR 2600 AVR 2600 7 X 65W 7.1 CHANNEL A/V RECEIVER SERVICE MANUAL CONTENTS ESD WARNING.2 LEAKAGE TESTING.3 BASIC SPECIFICATIONS.4 PACKAGING.5 FRONT PANEL CONTROLS.6 REAR PANEL CONNECTIONS.8 REMOTE CONTROL FUNCTIONS.11 CONNECTIONS/INSTALLATION.14 INITIAL SETUP.17 OPERATION.21 TROUBLESH

2、OOTING GUIDE.27 REMOTE 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 and other U.S. and worldwide patents issued and pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc. (c) 19

3、96-2008 DTS, Inc. All Rights Reserved. Faroudja DCDi Cinema is a trademark of Genesis Microchip Inc. HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC). HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing L

4、LC. iPod, iTunes, Apple, iPod touch, iPod classic and iPod nano are trademarks of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc. iPod and iPhone not included. SACD is a trademark of Sony Corporation. SIRIUS and all related marks and logos are trademarks o

5、f Sirius XM Radio Inc. and its subsidiaries. All other marks and logos are the property of their respective owners. All rights reserved. SIRIUS subscription sold separately. Taxes and a one-time activation fee may apply. SIRIUS tuner required (sold separately) to receive the SIRIUS service. All prog

6、ramming and fees subject to change. It is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate or otherwise make available any technology or software incorporated in receivers compatible with the SIRIUS Satellite Radio System. Service not available in Alaska or Hawaii. TiVo

7、 is a registered trademark of TiVo Inc. This product incorporates copyright protection technology that is protected by method claims of cer- tain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology

8、must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise author- ized by Macrovision Corporation. Reverse engineering or diassembly is prohibited. Please register your AVR 2600 at . Youll need the products serial number. At the same

9、time, you can choose to be notified about new products and/or special promotions. 0142CSK - HK AVR 2600 OM Inlay_ENG_v6_PRESS.qxp:HKP1477AVR245om.v2.qxd 22/07/09 15:54 Side 62 4 AVR 2600AVR 2600 AVR 2600 visit 5 AVR2600 harman/kardonharman/kardon 7 FRONT-PANEL CONTROLS ENGLISH ResolutionNavigationVi

10、deo Modes Source List Back/Exit OK Navigation Headphone Jack/EzSet/EQ Microphone Input Digital Audio Inputs (Optical and Coaxial Front) Remote IR Sensor Video Front Input USB Port Analog Audio Front Inputs Surround Modes Audio Effects Setup Standby/On Switch Info Settings VolumeMessage DisplayPower

11、Indicator / /ResolutionNavigationVideo Modes Source List Back/Exit OK Navigation Headphone Jack/EzSet/EQ Microphone Input Digital Audio Inputs (Optical and Coaxial Front) Remote IR Sensor Video Front Input USB Port Analog Audio Front Inputs Surround Modes Audio Effects Setup Standby/On Switch Info S

12、ettings VolumeMessage DisplayPower Indicator / / NOTE: To make it easier to follow the instructions throughout the manual that refer to this illustration, a copy of this page may be downloaded from the Product Support section at . 0142CSK - HK AVR 2600 OM Inlay_ENG_v3.qxp:HKP1477AVR245om.v2.qxd 02/0

13、6/09 12:30 Side 7 6 AVR2600 harman/kardonharman/kardon 8 FRONT-PANEL CONTROLS Power Indicator: This LED has three possible modes: Main Power Off: When the AVR is unplugged or the rear- panel Main Power Switch is off, this LED is off. Standby: Amber indicates that the AVR is ready to be turned on. On

14、: When the AVR is turned on, this LED turns white. NOTE: If the PROTECT message ever appears, turn off the AVR and unplug it. Check all speaker wires for a possible short. If none is found, bring the unit to an authorized Harman Kardon service center for inspection and repair before using it again.

15、Standby/On Switch: This electrical switch turns the receiver on, or places it in Standby mode for quick turn-on. Setup Button: Press this button to access the AVRs main menu. Info Settings Button: Press this button to directly access the AVRs Source Info submenu, which contains the settings for the

16、current source. Resolution: Press this button to access the AVRs video output resolution setting: 480i, 480p, 720p, 1080i, 1080p or 1080p/24 (if available on source and display). IMPORTANT NOTE: If the AVRs video output resolution is set higher than the capabilities of the actual connection, you wil

17、l not see a picture. If the best available video connection from the AVR to the TV is composite video, press this button and change the resolution to 480i. Audio Effects:Press this button to directly access the Audio Effects submenu, which allows adjustment of the tone and other audio controls. See

18、the Initial Setup section for more information. Video Modes: Press this button for direct access to the Video Modes submenu, which contains settings that may be used to improve the picture, if necessary, after you have adjusted the picture settings using the video display or TV. Surround Modes:Press

19、 this button to select a surround sound (e.g., multichannel) mode. The Surround Modes menu will appear on screen, and the menu line will appear in the front-panel display. See the Advanced Functions section for more information on surround modes. Source List: Press this button to select a source dev

20、ice, which is a component where a playback signal originates, e.g., DVD. Back/Exit: Press this button to return to the previous menu, or to exit the menu system. 5/17/3Navigation: These buttons are used to navigate the AVRs menus. OK: Press this button to select the currently highlighted item. Headp

21、hone Jack/EzSet/EQ Microphone Input: Plug a 1/4 headphone plug into this jack for private listening. This jack is also used to connect the supplied microphone for the EzSet/EQ procedure described in the Initial Setup section. USB Port: This port may be used in case a software upgrade for the receive

22、r is offered in the future. Do not connect a storage device, peripheral product or a PC here, unless instructed to do so as part of an upgrade procedure. Digital Audio and Analog Audio/Video Front Inputs: Connect a source component that will only be used temporarily, such as a digital camera or game

23、 console, to these jacks. Use only one type of audio and one type of video connection. NOTE: The AVRs menus refer to these jacks as the Optical Front, Coaxial Front, Composite Front, and Analog Front inputs. Volume Knob:Turn this knob to raise or lower the volume. Message Display:Various messages ap

24、pear in this two-line display in response to commands and changes in the incoming signal. In normal operation, the current source name appears on the upper line, while the surround mode is displayed on the lower line. When the on-screen display menu system (OSD) is in use, the current menu settings

25、appear. Remote IR Sensor:This sensor receives infrared (IR) commands from the remote control. It is important to ensure that it is not blocked. If covering the sensor is unavoidable, use an optional Harman Kardon HE 1000, or other infrared receiver, connecting it to the Remote IR Input on the AVR 26

26、00s rear panel. 0142CSK - HK AVR 2600 OM Inlay_ENG_v2.qxp:HKP1477AVR245om.v2.qxd 26/05/09 10:36 Side 8 7 AVR2600 harman/kardonharman/kardon 9 REAR-PANEL CONNECTIONS ENGLISH Analog 15 Inputs 6/8 Channel Inputs Video 1, 2 use an analog video connection instead. Always make a separate audio connection.

27、 Analog 1 5 Inputs:Connect the left and right analog audio outputs of a source device to any of these inputs. These inputs may be paired with any video inputs. NOTES: The Analog 2 and 4 inputs are each associated with a set of outputs. Consider using these connectors for an audio or video recorder.

28、You may optionally connect a source to both an analog and digital audio input. This is useful for making recordings, for multizone applications or simply as a backup. Analog 2 and 4 Outputs:Connect either of these analog audio outputs to the analog audio inputs of a recording device. A signal is ava

29、ilable at these outputs whenever an analog audio source is playing. Subwoofer Output:If you have a powered subwoofer with a line-level input, connect it to the Subwoofer Output. The Bridge III Input:Connect a Harman Kardon docking station (not included) to this input for use with most docking iPod m

30、odels, 4G and later, iPhone or iPhone 3G (not included). Turn the receiver off (Standby mode) when connecting The Bridge III. Fan Vents:This area contains vents used by the AVR 2600s fan to cool the system. Maintain a clearance of at least 3 inches from the nearest surface to avoid overheating the u

31、nit. It is normal for the fan to remain off at most normal volume levels. An automatic temperature sensor turns the fan on only when it is needed. IMPORTANT NOTE: Never block the fan vents, as doing so could allow the AVR to overheat to dangerous levels. Video 1/2/3 Inputs: Use these jacks to connec

32、t your video- capable source components (e.g., VCR, DVD player, cable TV box) to the receiver. Use only one type of video connection for each source. Video 2 Output:Connect this analog video output to the composite video input of a recording device. A signal is available at this output whenever an a

33、nalog video source is playing. Video Monitor Output:If any of your sources use composite video connections, connect this monitor output to the corresponding input on your video display. If your video display is equipped with HDMI or component video inputs, this connection is unnecessary, as the AVR

34、2600 will convert the composite video source signal to the correct format for a single video-cable connection to the TV. Component Video 1/2 Inputs:If a video source has analog component video (Y/Pb/Pr) capability, and if you are not using an HDMI connection, connect the component video outputs of t

35、he source to one of the sets of component video inputs. Do not make any other video connections to that source. Component Video Monitor Outputs:If you are using one of the Component Video Inputs and your television or video display is component-video-capable (but does not have an HDMI input), connec

36、t these jacks to the video display. 9 AVR2600 harman/kardonharman/kardon 11 REAR-PANEL CONNECTIONS ENGLISH NOTES: Due to copy-protection restrictions, there is no output at the Component Video Monitor Outputs for HDCP-copy- protected sources. Composite video signals are upscaled to as high as 1080i

37、and available at these outputs. If your video displays best connection is component video, it is the only video connec- tion required from the AVR to the display. AM and FM Antenna Terminals:Connect the included AM and FM antennas to their respective terminals for radio reception. Front, Center and

38、Surround Speaker Outputs: Use two-conductor speaker wire to connect each set of terminals to the correct speaker. Remember to observe the correct polarity (positive and negative connections). Surround Back/Zone 2 Speaker Outputs:These speaker outputs are used for the surround back channels in a 7.1-

39、 channel home theater, or may be reassigned to a remote room for multizone operation. Switched AC Accessory Outlet:You may plug the AC power cord of one source device into this outlet, and it will turn on whenever you turn on the receiver. Do not use a source that consumes more than 50 watts of powe

40、r. AC Power Cord:After you have made all other connections, plug the AC power cord into an unswitched wall outlet. 10 AVR2600 harman/kardonharman/kardon 12 MAIN REMOTE CONTROL FUNCTIONS SETUPINFOSLEEP AVR Power Off AVR Power On Source Selectors Audio Effects Alphanumeric Keys Soft keys Volume Mute D

41、evice Power On Device Power Off Surround Modes Video Modes OK Navigation Activity Menu Disc Menu Channel Sleep Settings Transport Controls IR Transmitter Lens Last Back/Exit Record Info Settings Setup Zone Selector 0142CSK - HK AVR 2600 OM Inlay_ENG_v2.qxp:HKP1477AVR245om.v2.qxd 26/05/09 10:36 Side

42、12 11 NOTE: To make it easier to follow the instructions throughout the manual that refer to this illustration, a copy of this page may be downloaded from the Product Support section at . 13 MAIN REMOTE CONTROL FUNCTIONS ENGLISH The AVR 2600 remote is capable of controlling 8 devices, including the

43、AVR itself and an iPod docked in an optional The Bridge III. During the installation process, you may program the codes for each of your source components into the remote. To operate a component, press its Selector button to change the device mode. Each Source Selector has been preprogrammed to cont

44、rol certain types of components, with only the codes specific to each brand and model changing, depending on which product code is pro- grammed. The AUX and Cable/SAT Source Selectors may be used for multiple device types, depending on the first digit of the product code. Other Source Selectors may

45、be reassigned to other device types (see Initial Setup section). AUX Source Selector: CD player product codes begin with 0, 1 or 2. VCR codes begin with 3 or 4. HDTV set-top box codes begin with 6, PVD codes begin with 7 and TiVoset-top box codes begin with 8. Cable/SAT Source Selector: Cable set-to

46、p box codes begin with 0, 1 or 2, and satellite set-top box codes begin with 3 or 4. IMPORTANT NOTE: All of the AVR 2600s audio and video inputs are independently assignable. Select the inputs to which the device is physically connected during Initial setup. Any device may be connected to any compat

47、ible input and given any name (e.g., DVD or Game). Most of the buttons on the remote have dedicated functions, although the precise codes transmitted vary depending on the device mode. Due to the wide variety of functions for various source devices, we have included only a few of the most-often used

48、 functions on the remote: alphanumeric keys, transport controls, television-channel control, menu access and power on and off. Buttons dedicated to the AVR are available at any time, even in another device mode: AVR Power On and Off, Audio Effects, Video Modes, Surround Modes, Volume, Mute and Sleep

49、 Settings. Press the Setup Button near the bottom of the remote to return it to AVR mode. A buttons function depends on which component is being controlled. See Table A13 in the appendix for listings of the functions for each type of component. IR Transmitter Lens: As buttons are pressed on the remote, infrared codes are emitted through this lens. AVR Power On Button: Press to turn on the AVR. The Master Power Switch on the rear panel must be on. Device Power Off Button: Pre