Onkyo-MD105X-md-sm维修电路原理图.pdf

《Onkyo-MD105X-md-sm维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《Onkyo-MD105X-md-sm维修电路原理图.pdf（56页珍藏版）》请在收音机爱好者资料库上搜索。

1、English Operating Instructions MiniDisc Recorder MD-105X Before usingConnectionsOperationsOther Information DISC LOADING MECHANISM0 REC DISPLAYEDIT/NO MINDISC RECODER AMCS （PUSH TO ENTER） STANDBY CD DUBBING INPUT ANALOG ST D1D2MO YES MD-105X STANDBY/ON RadioFans.CN 收音机爱 好者资料库 2 Thank you for purchas

2、ing . Before using Main Features Thank you for purchasing the ONKYO MD-105X MD Recorder. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain the optimum performance and listening enjoyment from you

3、r new MD-105X. Please retain this manual for future reference. 24-Bit A/D and D/A Converters Digital Rec Level Adjustment Rec Volume Control for Analog and Digital Inputs Album Dubbing and Fade Out Control Unique Dub It Feature Monaural Recording One-Touch Dubbing Signal Synchro Recording Memory Pre

4、servation This unit does not require memory preservation batteries. A built-in memory power back-up sys- tem preserves the contents of the memory dur- ing power failures and even when the unit is unplugged. The unit must be plugged-in in or- der to charge the back-up system. The memory preservation

5、period after the unit has been unplugged varies depending on cli- mate and placement of the unit. On the aver- age, memory contents are protected over a pe- riod of a few weeks after the last time the unit was unplugged. This period is shorter when the unit is exposed to a highly humid climate. Decl

6、aration of Conformity We, ONKYO EUROPE ELECTRONICS GmbH INDUSTRIESTRASSE 20 82110 GERMERING, GERMANY GERMERING, GERMANY ONKYO EUROPE ELECTRONICS GmbH K.OTSU declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical st

7、andards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3 (or EN60555-2, -3) U.S. and foreign patents licensed from Dolby Laboratories Licensing Corporation. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF

8、ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the prod

9、ucts enclosure that may be of sufficient mag- nitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying th

10、e appliance. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR AVIS RadioFans.CN 收音机爱 好者资料库 3 Before UsingConnectionsOther InformationOperations 1.Read Instructions All the safety and operating instructions should be read before the appliance is operated. 2.Retain In

11、structions The safety and operating instructions should be retained for future reference. 3.Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions All operating and use instructions should be followed. 5.Water and Moisture The applia

12、nce should not be used near water for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like. 6.Carts and Stands The appliance should be used only with a cart or stand that is recommended by the manufacturer. 6A. An appliance and cart c

13、ombination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 7.Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 8.Ventilation The appliance shoul

14、d be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or if placed in a built-in installation, such as a bookcase or cabinet tha

15、t may impede the flow of air through the ventilation openings, there should be free space of at least 5 cm (2 in.) and an opening behind the appliance. 9.Heat The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers)

16、 that produce heat. 10. Power Sources The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11. Polarization If the appliance is provided with a polarized plug having one blade wider than the other, please read the

17、 following information: The polarization of the plug is a safety feature. The polarized plug will only fit the outlet one way. If the plug does not fit fully into the outlet, try reversing it. If there is still trouble, the user should seek the services of a qualified electrician. Under no circumsta

18、nces should the user attempt to defeat the polarization of the plug. 12. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, especially near plugs, convenience receptacles, and the point where they exi

19、t from the appliance. 13. Cleaning The appliance should be cleaned only as recommended by the manufacturer. 14. Nonuse Periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 15. Object and Liquid Entry Care should be taken so that obje

20、cts do not fall and liquids are not spilled into the enclosure through openings. 16. Damage Requiring Service The appliance should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the ap

21、pliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 17. Servicing The user should not attempt to service the appliance beyond that de

22、scribed in the operating instructions. All other servicing should be referred to qualified service personnel. PORTABLE CART WARNING S3125A Important Safeguards 4 Precautions 1. Warranty Claim You can find the serial number on the rear panel of this unit. In case of warranty claim, please re- port th

23、is number. 2. Recording Copyright Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder. 3. Power WARNING BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CARE- FULLY. The voltage of the available power supply di

24、ffers according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz) written on the rear panel. Turning off the standby button does not shut off the power completely. So the power co

25、rd should be removed from the AC outlet when the unit is not used for a prolonged time. 4. Do not touch this unit with wet hands Do not handle this unit or power cord when your hands are wet or damp. If water or any other liq- uid enters the case, take this unit to an authorized service center for i

26、nspection. 5. Location of this unit Place this unit in a well-ventilated location. Take special care to provide plenty of ventilation on all sides of this unit especially when it is placed in an audio rack. If ventilation is blocked, this unit may overheat and malfunction. Do not expose this unit to

27、 direct sunlight or heat- ing units as this units internal temperature may rise and shorten the life of the pickup. Avoid damp and dusty places and places directly affected by vibrations from the speakers. In par- ticular, avoid placing the unit on or above one of the speakers. Be sure this unit is

28、placed in a horizontal position. Never place it on its side or on a slanted surface as it may malfunction. Do not place near tuners or TV sets. If placed next to a TV or tuner, it may cause recep- tion interference resulting in some noise in the TV or tuner output. 6. Care From time to time you shou

29、ld wipe the front and rear panels and the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a weak solu- tion of mild detergent and water, wring it out dry, and wipe off the dirt. Following this, dry immedi- ately with a clean cloth. Do not use rough material, thinners, alcohol or

30、other chemical solvents or cloths since these could damage the finish or remove the panel lettering. 7. Points to remember If this unit is brought from a cold environment to a warm one or is in a cold room that is quickly heated, condensation may form on the pickup, preventing proper operation. In t

31、his case, remove the disc and leave the power ON for about one hour to remove the condensation. When transporting this unit, be careful not to bump it. DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. CAUTION: THIS PRODUCT UTILIZES A LASER.

32、 USE OF CON- TROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. 5 Before UsingConnectionsOther InformationOperations Precautions(continued) For U.S. model The laser is covered by a housing which prevents exposure d uring op

33、eration or maintenance. However, this product is classified as a Laser Prod- uct by CDRH (Center for Devices and Radiological Health) which is a department of the Food and Drug Administration. According to their regula- tions 21 CFR section 1002.30, all manufactures who sell Laser Products must main

34、tain records of written communications between the manufac- turer, dealers and customers concerning radiation safety. If you have any complaints about instruc- tions or explanations affecting the use of this prod- uct, please feel free to write to the address on the back page of this manual. When yo

35、u write us, please include the model number and serial num- ber of your unit. In compliance with Federal Regulations, the certi- fication, identification and the period of manu- facture are indicated on the rear panel. FCC INFORMATION FOR USER CAUTION: The user changes or modifications not expressly

36、 approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

37、protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee th

38、at inter- ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de- termined by turning the equipment off and on, the user is encouraged to try to correct the inter- ference by one or more of the followin

39、g measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 6 Precautio

40、ns(continued) For British model Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. IMPORTANT The wires in the mains lead are coloured in accor- dance with the following code: Blue: Neutral Brown : Live As the colours

41、of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured

42、 brown must be con- nected to the terminal which is marked with the letter L or coloured red. IMPORTANT A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the re- placement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362. Check f

43、or the ASTA mark or the BSI mark on the body of the fuse. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME, THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DAN- GER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY

44、13 AMP SOCKET. If in any doubt, please consult a qualified electri- cian. For Canadian model CAUTION: THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSION FROM DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE CANADIAN DEPARTMENT OF COMMUNICA- TIONS

45、. For models having a power cord with a polarized plug: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Modele pour les Canadien ATTENTION: LINTERFRENCE RADIO LECTRIQUE GNRE PAR CET APPAREIL NUMRIQUE DE TYPE B NE DPASSE PAS LES LIMITES NONCES DANS LE RGLEMENT

46、 SUR LES PERTURBATIONS RADIO LECTRIQUES, SECTION APPAREIL NUMRIQUE, DU MINISTRE DES COM- MUNICATIONS. Sur les modles dont la fiche est polarise: ATTENTION: POUR VITER LES CHOCS LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.

47、For European model This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PRODUCT”. So, to use this model properly, read this Instruc- tion Manual carefully. In case of any trouble, please contact the store where you purchased the unit. To prevent being exposed to the

48、laser beam, do not try to open the enclosure. “CLASS 1 LASER PRODUCT” This label on the left hand panel states that: 1.This unit is a CLASS 1 LASER PRODUCT and em- ploys a laser inside the cabinet. 2.To prevent the laser from being exposed, do not remove the cover. Refer servicing to qualified perso

49、nnel. 7 Before UsingConnectionsOther InformationOperations Table of contents Checking the supplied accessories Check that the following accessories are supplied with this unit. z remote control cable x1 Optical fiber cable x1 Remote controller x1 RC-409MD Dry batteries UM-3 x2 Audio connection cable x2 Before Using Checking the supplied accessories. Below Using the remote controller. 8 Connections Connecting to the Onkyo Separate Collec