JBL Technical Note - Vol.1, No.15 电路原理图.pdf

《JBL Technical Note - Vol.1, No.15 电路原理图.pdf》由会员分享，可在线阅读，更多相关《JBL Technical Note - Vol.1, No.15 电路原理图.pdf（8页珍藏版）》请在收音机爱好者资料库上搜索。

1、Technical Note Volume 1, Number 15 INTRODUCTION: The purpose of this Technical Note is to offer selection criteria for both large and small monitor loudspeakers. Since early 1984, JBL and UREl monitor products have been marketed through JBL Professional, and JBLs total monitor market share is larger

2、 than that of any other com- pany. The joining of the two product lines has caused some confusion in certain quarters, and it is the aim of this Tech- nical Note to answer all questions of performance and usage. This Technical Note is divided into two main sections. The first deals with the large mo

3、nitors, while the second section deals with the small monitors. LARGE MONITORS: Background: Since 1980, JBLs Bi-Radial and UREIs Time Align monitors have become the most widely accepted commer- cial products for monitoring multi-track recording. Easily 90% of the worlds 16- and 24-track studios use

4、one or the other of the two types. Historically, the UREl 811, 813, and 815 Time Align systems grew out of the Altec 604 Duplex (coaxial) loud- speaker, which James B. Lansing had originally developed in 1943? The recording industrys long love affair with the point-source 604 had persisted through t

5、hick and thin, and in the late 1970s, Bill Putnam, the CEO of UREl, engaged the consulting services of Ed Long to come up with a dividing network for the basic 604 coaxial trans- ducer which would correct both amplitude and time domain anomalies in the basic unit. The models 811 (single coaxial), 81

6、3 (coaxial with added woofer), and 815 (coaxial with two added woofers) were developed. During the early 1980s, UREl developed their own proprietary coaxial unit, which utilized the JBL 2425 high-frequency driver. The model 813 in particular was an industry favorite. The JBL monitor philosophy grew

7、out of a different tradition. Long based on HF compression drivers and horn/ lens combinations, JBLs 4300 Series product line was expanded during the 1970s, and the two-, three-, and four- way designs became popular throughout the world. In 1980, the Bi-Radial 4430 and 4435 monitors were intro- duce

8、d 2 Improvements in HF drivers made it possible for extended range two-way systems to deliver substantially uniform acoustical power (2 dB) from about 500 Hz to 12 kHz. The resulting systems were easy to equalize in the majority of monitoring environments, and the use of Bi-Radial horns ensured abso

9、lutely even horizontal and vertical pattern control above 1 kHz. After the acquisition of URC, UREIs parent company, by Harman International, a new coaxial unit was developed by UREl and JBL engineers and was introduced in late 1985, and the current line of UREl Time Align monitors now takes advanta

10、ge of JBLs expertise in transducer manufac- ture. Both Time Align and Bi-Radial monitors make use of titanium HF drivers for extended response. The Basic Characteristics: The Bi-Radial and Time Align monitors have certain mutually exclusive characteristics: specifically, the Time Align monitors are

11、effectively point sources, while the Bi- Radials maintain flat power response above 1 kHz. There is no way that both of these advantages can be embodied in a single design. Figure 1: Beamwidth characteristics of UREl 813C Coaxial Loudspeaker System. Choosing the Right Studio Monitor for Specific App

12、lications: A Discussion of JBL and UREI Monitor Loudspeakers 6 dB Beamwidth (degrees) Frequency in Hz Horizontal Vertical For a coaxial design to work, the HF horn must be smaller than the LF cone so as not to impede the output from the cone. This inevitably means that, at crossover, the radiation p

13、attern from the HF section will widen in the verti- cal plane. This is shown in Figure 1. If the HF section of a two-way design is to maintain the same pattern control at crossover as the LF cone, it must be approximately the same size as the cone. This is the case with the Bi-Radial designs, and ob

14、viously such a HF horn cannot be mounted coaxially with a LF cone. The resulting pattern control for a Bi-Radial design is shown in Figure 2. Note that the horizontal control is quite smooth through the transition region. Vertical pattern control nar- rows down just at the single frequency where the

15、 output from the HF and LF transducers is precisely equal. The resulting directivity indices (Dl) of the two monitor designs are shown in Figure 3. Figure 2: Beamwidth (-6 dB) vs. Frequency, 4430 Frequency in Hz Figure 4: Delay between HF and LF acoustical center Figure 3: Directivity Factor (Q) and

16、 Directivity Index (Di) for 813C and 4435 Monitors. Figure 5: Frequency in Hz In summary, the smooth Dl (and power response) of the Bi-Radial design is bought at the expense of point source radiation, and conversely the point source nature of the Time Align design is bought at the expense of smooth

17、power response through the crossover region. So far, we have not mentioned that characteristic of the UREI monitors which gives them their name, time align- ment. In working out the dividing network for the UREI monitors, Ed Long used a multi-section low-pass filter, which acts like a delay line. It

18、 was precisely calculated to compensate for the inherent delay of high frequencies due to the fact that the HF driver is located well behind the LF acoustical center. 3 Details of this are shown in Figure 4. By comparison, the Bi-Radial design accomplished similar time alignment, but at a slightly v

19、ertical off-axis angle, as shown in Figure 5 4 LOW-FREQUENCY WAVEFRONTS Angle in Degrees Horizontal- Q Dl (dB) 813C 4435 HIGH-FREQUENCY WAVEFRONTS a = ARCSIN(X/2dO 2a = ARC BETWEEN NULLS X = WAVELENGTH AT CROSSOVER d, = CENTER-TO-CENTER SPACING PHASE RETARDED SLIGHTLY AT CROSSOVER TO SHIFT UP NULL A

20、XIS 2 Figure 6: FREQUENCY (Hz) Figure 6 shows the relative time domain performance of the two design approaches, along with the Blauert and Laws criteria for audibility of group delay effects in sound reproduction. Note that both designs fall well below the cri- teria. As a measure of how well the s

21、ystems can reproduce a square wave - and this is a difficult task for any loud- speaker we show photographs in Figure 7. Figure 7: Photos of square wave response at 750 Hz A. UREl 813 B. JBL 4435 In remaining matters of response, the two basic designs are similar. Here, we are referring to on-axis r

22、esponse, impedance, maximum acoustical output, and distortion. Typical comparisons are shown in Figures 8 through 11. Figure 8: 4435,1 W at 1 meter on horn axis, 2TT mounting; Impedance. Frequency in Hz Figure 9: 813C, 1 Wat 1 meter on HF axis, 2TT mounting; impedance. Frequency in Hz Figure 10: 443

23、5 driven to SPL of 110 dB at 1 meter (16 v RMS). Distortion raised 20 dB. Figure 11: 813C driven to SPL of 110 dB at 1 meter (8.2 v RMS). Distortion raised 20dB. GROUP DELAY (milliseconds) BLAUERT impedance. Figure 13: Beamwidth (Horizontal and Vertical) vs. Frequency, UREI 809 Figure 14: JBL 4425 O

24、n-axis response (1 W at 1 meter) and Impedance. Figure 15: JBL 4425 Horizontal and Vertical Beamwidth (-6 dB). Table 1. Characteristics of Intermediate Monitors Model Description Sensitivity (1W 1m) Pink Noise Power Rating Maximum Output* ( 1m) 809A Time Align 93 dB 100 watts 113dB 4425 Bi-Radial 91

25、 200 114 dB-SPL Impedance (ohms) Frequency in Hz Response Impedance. Angle in Degrees Horizontal Vertical Frequency in Hz SPL-dB Frequency In Hz Impedance Vertical Horizontal Angle in Degrees 4 SMALL MONITORS: Background: JBL has been the dominant force in the small studio monitor market since the i

26、ntroduction of the 4310 in the late 1960s. The need for a small, rugged bookshelf monitor had been expressed by many in the recording and broadcast industries, and the 4310 was designed specifically for that application. This system was of three-way design, and it used a 300 mm (12 in) low-frequency

27、 transducer, with mid- and high-frequency cone transducers. During the early 1970s, the 4310 underwent redesign, and the 4311 came into being. Both the 4310 and 4311 were tailored to have a forward mid-range characteristic, along with a slight rise in the 40 Hz range. Recalling that the Altec 604 wa

28、s the benchmark of the day, this specific system voicing was in keeping with the taste of the time. As the 1970s progressed, and as JBL broadened its base of technical measurement, a need was generated for monitor systems with flatter overall response and increased power bandwidth. In a sense, JBL b

29、rought about this need by introducing the later models in the 4300 Series, which the industry at large took as models to match. The broad acceptance of digital recording in the early 1980s under- scored the need for further system refinement, and the 4400 Series monitors were created. Throughout thi

30、s period of monitor performance refine- ment, however, the 4311 remained solidly in the product line. Many users favored the voicing of the 4311, since it allowed them to hear program details under less than ideal monitoring conditions. The system had a well deserved reputation for ruggedness, and t

31、he fact that there were so many of them in the field made the 4311 virtually a de facto standard. Every studio, whatever its principal business, had to have at least one pair! The Present Situation: From its inception, the 4311 monitor carried the desig- nation Control Monitor, while all other model

32、s have car- ried the designation Studio Monitor. Even when later refined in the mid 1980s as the 4312, it retained the same forward voicing and low-frequency characteristics of its predecessors. Thus, JBL has maintained a distinction between Studio Monitors and Control Monitors. Recently, the small

33、Control 1 has been added to the product line as an extension downward in size. JBL bookshelf Studio Monitor characteristics are detailed in Table 2, and the latest versions of the Control Monitors are detailed in Table 3. In general, the 4400 Series Studio Monitors were designed with the following p

34、erformance characteristics: A. Flat axial response, with extended bandwidth beyond 20 kHz and optimum low-frequency performance in free- standing position. B. Smooth power response. C. Smooth phase (time domain) response. D. Accurate stereo imaging. The demanding needs of digital recording, as well

35、as stereo TV, have focused attention on these details of per- formance. Careful dividing network design ensures that these new monitors have controlled transitions between drivers, resulting in smooth power response for a better match between monitor and environment. Mirror-imaged (separate left and

36、 right) models ensure accurate stereo imaging. The Control Monitors have been designed with the following characteristics as most important: A. Rising mid-range response. B. Low-frequency response relatively undamped for rising response in free-standing positions. C. Extended high frequency response

37、. The latest 4312A has the same titanium dome tweeter as in the 4400 Series models. D. Accurate stereo imaging. The 4312A is mirror-imaged for ideal stereo reproduction. Both Control and Studio Monitors have been designed for ruggedness and are all able to withstand normal electri- cal and physical

38、stress. The Control 1 has a protective network, which allows it to carry a realistic 150-watt continuous power rating. Table 2. Characteristics of 4400-Series Bookshelf Monitors Model Description Sensitivity (1W 1m) Pink Noise Power Rating Maximum Output* ( 1m) 4406 2-way 6 87 dB 75 watts 106 dB 440

39、8 2-way 8 89 100 109 4410 3-way 10 91 125 112 4412 3-way 12 90 150 112 *Peak output capability at rated power input Model Description Sensitivity (1W 1m) Pink Noise Power Rating Maximum Output* ( 1m) 4312A 3-way 12 91 dB 100 watts 111 dB Control 1 2-way 5 1/ 4 90 150 106 Table 3. Characteristics of

40、4312A and Control 1 5 Criteria for Choosing a Small Monitor: Many users may already have firm ideas about which monitor is right for them, but for those who are not sure, we offer the following suggestions. A. Near-field monitoring: We strongly recommend using either the 4406 or 4408 two-way system

41、for this applica- tion. Program spectral balance is critical in recording mix- down applications, and the flat response of these models works to advantage. B. Monitoring outgoing broadcast signals and quality con- trol applications: The 4408 is the ideal broadcast monitor and may be rack-mounted in

42、tight physical spaces. The 4312A and 809A may also be recommended here, inasmuch as they can be operated at high levels, making it easier to spot problems such as noise or distortion. C. Remote recording applications: We recommend either the 4410, 4412, or the 809A because of their smooth, extended

43、low-distortion response. This facilitates making critical decisions both in balance and critical stereo image placement. If size is a constraint, the 4408 may be used. D. Audio-visual applications: We recommend the Control 1 for smaller scale applications, and either the 809A or 4312A for larger sca

44、le applications. All three of these will produce excellent speech articulation. E. General video and radio post-production work: We recommend the 4412, 4312A, or 809A, depending largely on the taste of the user. F. Foreground or background music applications: The Con- trol 1 is ideal for this applic

45、ation, if space is at a premium, because of its small size and optional mounting accesso- ries. The 4406 may be used with the MC 4401 mounting bracket for wider frequency range requirements. Relevant Measurements: Figures 16 and 17 show typical on-axis frequency response and impedance curves for the

46、 4406 and 4412 studio monitors. Note the extremely flat and extended response. Figure 17: On-Axis Frequency Response and Impedance vs. Frequency, 4412 Figures 18 and 19 show typical on-axis frequency response and impedance curves for the Control 1 and the 4312A. In both cases, note the generally ris

47、ing response in the 500 to 5000 Hz range. Figure 18: On-Axis Frequency Response and Impedance vs. Frequency, Control 1 Figure 19: On-Axis Frequency Response and Impedance vs. Frequency, 4312A dB-SPL Frequency in Hz Impedance (ohms) dB-SPL Impedance (ohms) Frequency in Hz Figure 16: On-Axis Frequency

48、 Response and Impedance vs. Frequency, 4406 dB-SPL Frequency in Hz knpwtanco (ottms) dB-SPL Impedance (ohms) Frequency in Hz lmpedanee 6 Figure 20 shows the beamwidth characteristics of the 4412, while Figure 21 shows that of the 4312A. Note that the horizontal pattern control of the 4412 is smoothe

49、r than that of the 4312A, indicating better control of power response. Figure 21: Beamwidth (-6 dB) vs. Frequency, 4312A References: 1. J. B. Lansing, The Duplex Loudspeaker, J. Society of Motion Picture Engineers, Volume 43, Number 3 (Sept. 1944). 2. D. Smith, D. Keele, and J. Eargle, Improvements in Monitor Loudspeakers, J. Audio Engineering Society, Volume 31, Number 6 (June 1983). 3. D. Fink, Time Offset in Crossover Design, J. Audio Engi