Gemini-EX26-mix-sm维修电路原理图.pdf

《Gemini-EX26-mix-sm维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《Gemini-EX26-mix-sm维修电路原理图.pdf（12页珍藏版）》请在收音机爱好者资料库上搜索。

1、SERVICE MANUALFeatures, Operating Instructions.Page 2Specifications.Page 3DiagramsPage 4Parts List.Page 7Schematics.Page 12EX-26RadioFans.CN 收音机爱 好者资料库 Congratulations on purchasing the Gemini EX-26 mixer! This state of the art mixer is backed by a three-year warranty, excluding crossfader and chann

2、el slides. We know youre anxious to hook everything up and start mixing beats and cranking up the volume on those hot dance tracks, but we suggest reading this instruction manual first as there are really cool features on this mixer that we wouldnt want you to miss! The EX-26 Mixer features a crossf

3、ader which controls a super-quiet photo coupler to give you smooth operation and the cleanest possible sound, along with a hamster switch that is easily accessible on the front of the mixer. This “hamster” switch reverses the direction of the main crossfader. This mixer also features individual “ham

4、ster” switches for the separate channel input faders as well. For additional information, refer to the diagrams on pages 1 & 2 for crossfader adjustment and channel slide curve. 2 Stereo Channels State of the Art Cue Section 2 Phono & 2 Line Inputs Channel Slide Curve Control Crossfader with Curve C

5、ontrol Adjustable Input Assign Switches Crossfader Reverse (Hamster) Button Individual Channel Fader Reverse (Hamster) Buttons LED Display Gain, High, Mid and Low tone controls for each channel Balanced and Unbalanced Master Outputs Record outputs 1. All operating instructions should be read before

6、using this equipment. 2. Treat this unit as you would any other piece of electrical equipment and use good common sense! 3. To reduce the risk of electrical shock, do not open the unit. There are NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service technician. INTRODUCTION

7、FEATURES 4. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove. 5. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents. 6. When moving this equipment, it should be placed in its original carton and packaging. This wi

8、ll reduce the risk of damage during transit. 7. Do not expose this unit to rain or moisture. 8. Do not use any spray cleaner or lubricant on any controls or switches. Okay, lets hook everything up! 1. Make sure that the POWER (1) switch is in the “OFF” position. This unit comes supplied with a 15 vo

9、lt AC adaptor. Plug the adaptor into the rear panel power jack. Then plug the adaptor into your power strip or outlet. 2. The EX-26 mixer is supplied with 3 sets of output jacks. The BALANCED MASTER OUTPUT (2) jacks are used to connect to your main amplifier using standard cables with 1/4” connector

10、s. We recommend using the balanced amp outputs if the cables to your amp are 25 feet or more. BALANCED MASTER OUTPUTS have three separate conductors, two of which are signal (positive and negative) and one shield (ground). The balanced line uses a tip-ring-sleeve connection. Tip = hot or positive (+

11、), ring = cold or negative (-), and sleeve = shield/ground. The MASTER OUTPUT (3) jacks are unbalanced and are also used to connect to your main amplifier. The REC OUTPUT (4) jacks can be used to connect the mixer to the record input of your recorder enabling you to record your mix. CAUTIONSIn the U

12、.S.A., if you have any problems with this unit, call 1-732-738-9003 for customer service. Do not return equipment to your dealer. CONNECTIONSRadioFans.CN 收音机爱 好者资料库 Page 2 3. On the rear panel are 2 stereo LINE (5,6) inputs and 2 stereo PHONO (7,8) inputs. The phono inputs will accept only turntable

13、s with a magnetic cartridge. GROUND SCREWS (9) for you to ground your turntables are located on the rear panel. The stereo line inputs will accept any line level input such as a CD player, cassette player, etc. 4. Headphones can be plugged into the front panel mounted PHONES (10) jack. 1. POWER ON:

14、Once you have made all the equipment connections to your mixer, press the POWER (1) switch. 2. CHANNEL 1: The GAIN (11), HIGH (12), MID (13), and LOW (14) controls allow you to fully adjust the volume and EQ of the sound source. The Channel 1 REVERSE SWITCH (15) allows you to reverse the direction o

15、f the Channel 1 slide fader. (17) The Channel 1 SLIDE FADER (17) controls the input level of this channel. 3. CHANNEL 2: The GAIN (11), HIGH (12), MID (13), and LOW (14) controls allow you to fully adjust the volume and EQ of the sound source. The Channel 2 REVERSE SWITCH (16) allows you to reverse

16、the direction of the Channel 2 slide fader. (18 ) The Channel 2 SLIDE FADER (18 ) controls the input level of this channel. 4. EQ CONTROLS: There is Low, Mid and High equalization for each channel with an extremely wide range of adjustment. 5. INPUT ASSIGN SWITCHES: You can adjust the position of th

17、e INPUT ASSIGN SWITCHES (21, 22) to move left to right, up and down, or at a 45 degree angle. Make these adjustments with the power OFF. 1) Remove the channel slide knobs, crossfader knobs and the 4 screws from the sides of the lower faceplate. Then remove the lower faceplate. 2) Remove the 2 screws

18、 in the corners of the assign switch plate. Rotate the switch plate to the desired position, and replace the screws and tighten down. 3) To position the switch at a 45-degree angle, you need to reposition the switch on the assign switch plate. First, remove the 2 screws in the corners of the assign

19、switch plate. Then, lift the switch plate up and remove the 2 smaller screws next to the switch. Rotate the switch plate to the right until the 45-degree holes align with the switch holes, replace the screws and tighten down. Replace the switch plate and tighten down. NOTE: Keep track of where you p

20、osition the input assign switches. OPERATION6. CHANNEL SLIDE CURVE SWITCHES: Use the 3 position CHANNEL SLIDE CURVE SWITCHES (23,24) to adjust the kind of curve the channel slides have. Move the selected channel slide curve switch to the 6 (top) position to make the increase in level gradual and eve

21、n. Move the channel slide curve switch to the 20 (center) position to make the increase in level less gradual as you move channel slide up. Move the channel slide curve switch to the 30 (bottom) position to make the increase in level even less gradual, especially at the top of the slide. 7. CROSSFAD

22、ER SECTION: The CROSSFADER (25) allows the mixing of one source into another. The left side of the CROSSFADER (25) is CHANNEL 1 and the right side is CHANNEL 2. The CROSSFADER CURVE CONTROL (26) allows you to adjust the kind of curve the crossfader has. Move the CROSSFADER CURVE CONTROL (26) to the

23、right to make the curve steep and cutting (perfect for scratching). Move the CROSSFADER CURVE CONTROL(26) to the left to make the curve gradual and gentle. The CROSSFADER REVERSE BUTTON (27) allows you to reverse the crossfader so that CHANNEL 2 is controlled by the left side of the crossfader and C

24、HANNEL 1 is controlled by the right side of the crossfader. When REVERSE is activated the REVERSE LED (28) will light. NOTE: When the CROSSFADER REVERSE BUTTON is activated (depressed), only the crossfader reverses. The Channel Slides, Gain, and EQ controls do not reverse. 8. OUTPUT CONTROL SECTION:

25、 The level of the MASTER OUTPUT (2, 3) is controlled by the MASTER CONTROL (20). The BALANCE CONTROL KNOB (19) controls the balance between the output of the left and right channels. NOTE: The RECORD OUT (4) has no level control. The level is set by the channel slides and the gain controls of the se

26、lected channel. The EQ of the channels is set by the low, mid and high controls of that same channel. 9. CUE SECTION: By connecting a set of headphones to the PHONES JACK (10), you can monitor the music coming out of each channel separately or both channels together. Move the CUE FADER (29) to the l

27、eft to hear CHANNEL 1 and to the right to hear CHANNEL 2. Move the CUE FADER (29) to the center to listen to both channels together. The PHONES MUTE BUTTON (30) will instantly mute your cue mix. 10. DISPLAY: The red LED in the center of the display tells you that the power in your EX-26 Mixer is on.

28、 The multi-colored LED DISPLAY (31) on either side of the center tells you the output level of your 2 channels. Okay, thats it! NOW youre ready to grab a couple of great CDs or records, crank it up and get the party started! INPUTS: Phono. 1mHz.2mV 47k Line.100mV 20k OUTPUTS: Master (balanced.0 dB 2

29、 V 800 Max.40 V Peak to Peak Master (unbalanced).0 dB 1V 400 Max.20V Peak to Peak Rec.150mV 5k GENERAL: Low.+ 12dB/- 32 dB Mid.+ 12dB/- 32 dB High.+ 12dB/- 32 dB Gain. .0 to -20dB Frequency Response.20Hz 20kHz +/- 2dB Distortion.less than 0.08% S/N Ratio.better than 80dB Power Adapter.115V/15V AC 0.

30、5A 230V/15V AC 0.5A Dimensions.6.5”W x 14.25”H x 3.00”D SPECIFICATIONS Page 3 16312122232417182825161514141313121219111120122334455779966882627293010CH 1CH 2CH 1CH 2CH 1CH 2CH 1CH 2CUE 1CUE 2CUE 1CUE 2 PART# QUANTITY NAME1012-0261PANEL CONTROL2012-0271PANEL CONTROL3024-1651PANEL FRONT4034-1181PANEL

31、REAR5021-6011BRACKET VR6032-1041COVER BOTTOM7022-3743HOLDER FADER8022-3762HOLDER SWING9041-4511HEAT SINK1011023-6742KNOB SWING12002-5311KNOB PUSH (SMALL)13002-5321BUSHING FOR KNOB(SMALL)14002-5803KNOB PUSH15002-5813BUSHING FOR KNOB16002-7283KNOB SLIDE (BIG)17002-7271KNOB SLIDE (SMALL)1819003-14912KN

32、OB ROTARY (A)20148-31312KNOB INLAY (COPPER)2122003-7451BRIGHTENEDACRYLIC23003-4361LIGHT PLATEACRYLIC24003-74615HOLDER LED25003-9822HOLDER LED 526003-7471HOLDER LED27049-1901CLIP WIRE28049-2064PAD FOOT29146-7162GND SCREW (BIG)3031159-2162SWING DUST PROOFCLOTH32159-1713VR DUST PROOFCLOTH33159-1671VR D

33、UST PROOFCLOTH (SMALL)3435196-1253SERIAL NO:LABEL36255-1981GIFT BOX37157-9941OWNERS MANUAL38156-0891WARRANTY CARD39153-2161POLYFORM40153-2261POLYFOAM CUBE4142095-0573VDE LABEL43099-1671A LABEL44099-1691V LABEL45099-1681J LABEL46099-2322LABEL-GREEN47099-2332LABEL-RED48099-2342LABEL-YELLOW49099-2661CA

34、UTION LABEL5051099-0141LABEL - MADE INTAIWAN52099-2141LABEL-MADE INCHINA5354190-0621SILICON GELPARTS LIST6566170-3501MASTER CARTON6768099-2302100V LABEL74751262-3231PRINTED CIRCUITBOARD EX-26-12262-3241PRINTED CIRCUITBOARD EX-26-23262-3251PRINTED CIRCUITBOARD EX-26-34262-3192PRINTED CIRCUITBOARD EX-

35、18-45262-3201PRINTED CIRCUITBOARD EX-18-56262-3261PRINTED CIRCUITBOARD EX-26-67262-3271PRINTED CIRCUITBOARD EX-26-78262-3222PRINTED CIRCUITBOARD EX-18-7( PC8)910074-1095INTEGRATED CIR-CUIT NJM2068D(C4570C)11074-1637INTEGRATED CIR-CUIT NJM4558DD(M5218A, BA15218)12074-1131INTEGRATED CIR-CUIT NJM4556L1

36、3074-0224INTEGRATED CIR-CUIT LB1403N(BA6124)1415074-1071INTEGRATED CIR-CUIT NJM7812FA16074-1141INTEGRATED CIR-CUIT NJM7912FA1718076-0022SILICON TRANSIS-TORS 2SC94519076-003SILICON TRANSIS-TORS OR 2SC181520076-0964POWER MOSFETS2SK3632122079-5012PHOTO COUPLERP873-1323079-00310SILICON DIODE1N414824079-

37、0272RECTIFIER DIODE1N40022526079-0122ZENER DIODERD12EB2 (MTZ12B)27079-0111ZENER DIODERD9.1EB2 (MTZ9.1B)2829059-1391AC ADAPTER AC120V60Hz/AC15V 500mA30059-1401AC ADAPTER AC230V50Hz/AC15V 500mA31059-1491AC ADAPTER AC240V50Hz/AC15V 500mA32059-1511AC ADAPTER AC100V60Hz/AC15V 500mA3334083-0691PUSH SWITCH

38、PHONO-ON, OFF35083-0971PUSH SWITCH36083-1192PUSH SWITCH37083-1201POWER SWITCH UL3839081-0492SLIDE SWITCH 4P3CCH1,CH240082-0192LEVER SW 4P2CP=18 PH/LN SW41072-1133SLIDE VRCH1,CH2, FADER42072-0921SLIDE VR 30mm L=1520KB243073-0314SEMI-FIXED VRB10K 67-5-54445071-166 I4ROTARY VR 14(F)L=22.5 50KA2GAIN, MA

39、STER46071-167 I6ROTARY VR L=22.550KE2C.C47071-206 I1ROTARY VR L=22.520KMN2C.C BAL-ANCE48071-2241ROTARY VR L=22.5250KC2495051080-1065LED (RED) 3.1552080-1032LED (YELLOW) 3.1553080-1078LED (GREEN) 3.1554080-1113LED (GREEN/RED) 35556092-141G2PHONE JACK 6.357092-1411PHONE JACK 6.358092-1351DC JACK 2.559

40、161-16534P RCA JACK6061066-518181/8 W CARBON FILMRESISTOR S 1062066-52521/8 W CARBON FILMRESISTOR S 2063066-53621/8 W CARBON FILMRESISTOR S 566465066-54841/8 W CARBON FILMRESISTOR S 18066066-55761/8 W CARBON FILMRESISTOR S 43067066-55921/8 W CARBON FILMRESISTOR S 51068066-56021/8 W CARBON FILMRESIST

41、OR S 56069066-56321/8 W CARBON FILMRESISTOR S 7507071066-571101/8 W CARBON FILMRESISTOR S 1K72066-57581/8 W CARBON FILMRESISTOR S 1.5K73066-57781/8 W CARBON FILMRESISTOR S 1.8K74066-58041/8 W CARBON FILMRESISTOR S 2.4K75066-58141/8 W CARBON FILMRESISTOR S 2.7K76066-584181/8 W CARBON FILMRESISTOR S 3

42、.6K77066-58741/8 W CARBON FILMRESISTOR S 4.7K78066-58841/8 W CARBON FILMRESISTOR S 5.1K7980066-58961/8 W CARBON FILMRESISTOR S 5.6K81066-59141/8 W CARBON FILMRESISTOR S 6.8K82066-593121/8 W CARBON FILMRESISTOR S 8.2K83066-59421/8 W CARBON FILMRESISTOR S 9.1K8485066-595201/8 W CARBON FILMRESISTOR S 1

43、0K86066-60121/8 W CARBON FILMRESISTOR S 18K87066-604121/8 W CARBON FILMRESISTOR S 24K88066-607161/8 W CARBON FILMRESISTOR S 33K8990066-61141/8 W CARBON FILMRESISTOR S 47K91066-61241/8 W CARBON FILMRESISTOR S 51K92066-61421/8 W CARBON FILMRESISTOR S 62K93066-61721/8 W CARBON FILMRESISTOR S 82K9495066

44、-619101/8 W CARBON FILMRESISTOR S 100K96066-62161/8 W CARBON FILMRESISTOR S 120K97066-62221/8 W CARBON FILMRESISTOR S 130K98066-63621/8 W CARBON FILMRESISTOR S 510K99066-65121/8 W CARBON FILMRESISTOR S 1M100101 051-0102CERAMIC CAPACI-TOR 10P/50V102 051-0264CERAMIC CAPACI-TOR 47P/50V103 051-0284CERAM

45、IC CAPACI-TOR 56P/50V104 051-03414CERAMIC CAPACI-TOR 100P/50V105106 054-0062POLYESTER CAPACI-TOR 0.0027/50V107 054-0104POLYESTER CAPACI-TOR 0.0056/50V108 054-0114POLYESTER CAPACI-TOR 0.0068/50V109 054-0124POLYESTER CAPACI-TOR 0.0082/50V110 054-0138POLYESTER CAPACI-TOR 0.01/50V111 054-0184POLYESTER C

46、APACI-TOR 0.027/50V112 054-0288POLYESTER CAPACI-TOR 0.15/50V113114 050-1252ELECTROLYTICCAPACITOR 1/50V115 050-02910ELECTROLYTICCAPACITOR 10/16V116 050-03610ELECTROLYTICCAPACITOR 22/25V117 050-0381ELECTROLYTICCAPACITOR 33/16V118 050-0434ELECTROLYTICCAPACITOR 47/16V119 050-0491ELECTROLYTICCAPACITOR 10

47、0/16V120 050-0882ELECTROLYTICCAPACITOR 2200/25V121122 050-1962ELECTROLYTICCAPACITOR MINI48 0.1/50V123 050-1304ELECTROLYTICCAPACITOR MINI48 4.7/50V124 050-13310ELECTROLYTICCAPACITOR MINI48 10/25V125 050-11118ELECTROLYTICCAPACITOR MINI48 22/16V126 050-1481ELECTROLYTICCAPACITOR MINI57 33/16V127 050-134

48、2ELECTROLYTICCAPACITOR MINI68 47/25V128 050-1852ELECTROLYTICCAPACITOR MINI89 220/25V129130 060-7025JUMP WIRE “I” TYPE0.5 P=5mm T/52131 060-70211JUMP WIRE “I” TYPE0.5 P=6mm T/52132 060-70216JUMP WIRE “I” TYPE0.5 P=7.5mm T/52133 060-7025JUMP WIRE “I” TYPE0.5 P=10mm T/52134 060-7028JUMP WIRE “I” TYPE0.

49、5 P=12.5mm T/52135136 092-02623P CONNECTORBASE B3B-XH-A 180137 092-03124P CONNECTORBASE B4B-XH-A 180138 092-03925P CONNECTORBASE B5B-XH-A 180139 092-02917P CONNECTORBASE B7B-XH-A 180140141 092-04422P CONNECTORBASE B2B-XH-A 90142 092-04513P CONNECTORBASE B3B-XH-A 90143 092-05134P CONNECTORBASE B4B-XH

50、-A 90144 092-07226P CONNECTORBASE MOLEX 260090145 092-10727P(P=2mm) CONNEC-TOR BASE A2001-7P90146147 091-26713P CONNECTORWITH WIRE XHP-03STRIP6 150mm148 091-48013P CONNECTORWITH WIRE XHP-03STRIP6 120mm146147 091-26713P CONNECTORWITH WIRE XHP-03STRIP6 150mm148 091-48013P CONNECTORWITH WIRE XHP-03STRI