Philips-DVD-763-SA-Service-Manual电路原理图.pdf

《Philips-DVD-763-SA-Service-Manual电路原理图.pdf》由会员分享，可在线阅读，更多相关《Philips-DVD-763-SA-Service-Manual电路原理图.pdf（64页珍藏版）》请在收音机爱好者资料库上搜索。

1、Published by MW 0265 Service PaCCopyright 2002 Philips Consumer EAll rights reserved. No part of this publretrieval system or transmitted, in anymechanical, photocopying, or otherwDVD-Video Player DVD763SADVD763SA /001 /021 /0517 Electrical Diagrams and Print-Layouts Diagram PWBPower Supply Unit 46A

2、V Board: SYS Clk if it is, press OPEN/CLOSE, if it is not, press STOP. By pressing PLAY the script will proceed to the next test. If the user presses PLAY before OPEN/CLOSE or STOP, the DispLed nucleus will return TRUE (LED test successful).5.3.3 Keyboard TestThe keyboard of the DVD player is tested

3、 by nucleus DispKeyb. The user is expected to press all keys on the local keyboard once. The code of the key pressed is shown on the local display (1 hexadecimal digit) immediately followed by a (hexadecimal) number indicating how many times that key has been pressed. Example of the local display du

4、ring this test:Figure 5-7 The key-codes displayed on the local display will scroll from right to left when the display gets full, the text “K“ will remain on display.Figure 5-8 If any keys are detected more than once (due to hardware error), the key-code is displayed twice (or more), with the second

5、 digit increased by 1. If the user does not press all keys minimally once (in any order), the DispKeys nucleus will return FALSE and cause an error in the overall result of the player script. The user can leave the keyboard test by pressing the PLAY key on the local display of the DVD player for at

6、least one full second. The result of the keyboard test is shown on local display as follows:Figure 5-9 OrFigure 5-10 Pressing PLAY on the local keyboard again will proceed to the next text.5.3.4 Remote Control TestThe remote control of the DVD player is tested by nucleus DispRc. The user must press

7、any key on the remote control just once. The codes of the key pressed will be shown on the local display in hexadecimal format. Example:If OK, press OPEN/CLOSEIf OK, press OPEN/CLOSEIf OK, press OPEN/CLOSEIf NOK, press STOPIf NOK, press STOPIf NOK, press STOPpress PLAY to continueCL 16532162_031.eps

8、080102CL 196532162_032.eps080102KEY ID KEY0 PLAY/PAUSE1 STOP2 OPEN/CLOSE3 STANDBY4 NEXT5 PREVIOUS7 SMART PICTURE8 NAVIGATION -UP9 NAVIGATION -DOWNA NAVIGATION - LEFTB NAVIGATION - RIGHTC DISC MENUDOKE SOUNDCL 26532039_027.eps203020CL 16532162_033.eps080102CL 16532162_034.eps080102CL 16532162_035.eps

9、140102Figure 5-11 Diagnostic Software, Trouble Shooting and Test Instructions EN 25DVD763SA 5.In this example 23 is the hexidecimal code of the pressed RC key. The user can leave the remote-control test by pressing PLAY on the local keyboard of the DVD player. The remote control test is successful i

10、f a code was received before the user pressed the PLAY key. Pressing the PLAY key, before pressing a key on the remote control, gives an error in the remote control test (note that the remote control test will also fail if a key on the remote control was pressed but no code was received). The remote

11、 control test does not check upon the contents of the received code, that is it will not be checked if the received code matches the key pressed. If desired, the user can manually check this code by using a code-table for the remote control key-codes. Figure 5-12 After pressing PLAY, the result of t

12、he remote control test is displayed on the local display of the DVD player as follows:Figure 5-13 OrFigure 5-14 Pressing PLAY on the local keyboard again will proceed to the next test.5.3.5 P50 Loop-Back TestFor the P50 loop-back test, the user must first press a key to decide if the test is to be p

13、erformed.The display will show the following message:Figure 5-15 If the user presses STOP, the P50 test will be skipped.If the user presses OPEN/CLOSE, the P50 test is performed and the result is displayed as follows:Test successful:Figure 5-16 Test fails:Figure 5-17 Press the PLAY key to continue t

14、o the next textRC Key id Hexadecimal codeSTANDBY 0C11223344556677889900RETURN 83DISPLAY EFDISC MENU 54SYSTEM MENU 82CURSOR UP 58CURSOR DOWN 59CURSOR LEFT 5ACURSOR RIGHT 5BOK 5CPREVIOUS 21NEXT 20STOP 31PLAY 2CPAUSE 30SUBTITLE 4BANGLE 85ZOOM F7AUDIO 4EREPEAT 1DREPEAT A-B 3BSHUFFLE 1CSCAN 2ACL 16532162_037.eps080102CL 96532065_013.eps120799 CL 96532065_014.eps120799 CL 16532007_004.eps090102CL 16532007_005.eps090102CL 16532007_006.eps090102