Yamaha-DVXS-150-Service-Manual电路原理图.pdf

上传人:cc518 文档编号:89940 上传时间:2020-10-11 格式:PDF 页数:100 大小:14.67MB
下载 相关 举报
Yamaha-DVXS-150-Service-Manual电路原理图.pdf_第1页
第1页 / 共100页
Yamaha-DVXS-150-Service-Manual电路原理图.pdf_第2页
第2页 / 共100页
Yamaha-DVXS-150-Service-Manual电路原理图.pdf_第3页
第3页 / 共100页
亲,该文档总共100页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

《Yamaha-DVXS-150-Service-Manual电路原理图.pdf》由会员分享,可在线阅读,更多相关《Yamaha-DVXS-150-Service-Manual电路原理图.pdf(100页珍藏版)》请在收音机爱好者资料库上搜索。

1、SERVICE MANUAL This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore no

2、t been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any ser

3、vice required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establi

4、sh a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable

5、 and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by

6、 grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. IMPORTANT NOTICE 100917 SERVICE MANUAL DVR-S150/NX-P150 HOME THEATER SOUND SYST

7、EM DVX-S150 The DVX-S150 is composed of the DVR-S150 and the NX-P150. DVX-S150 DVR-S150NX-P150 構成。 DVR-S150 SELF DIAGNOSIS FUNCTION (DIAG) / DVR-S150自己診断機能() . . . . . . . . . .2243 DVR-S150 D-AMP MODULE TROUBLESHOOTING / DVR-S150 D-故障診断 . . . . . . . .44 DVR-S150 AMP ADJUSTMENT / DVR-S150部調整 . . .

8、. . . . . . . . . . . . . . . . . . . .44 DISPLAY DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 IC DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4656 DVR-S150 BLOCK DIAGRAM . . . . . . . . . . . . . .5759 DVR-S150 PRINTED CIRCUIT BOARD . . . . . . .6068 NX-SW

9、150 PRINTED CIRCUIT BOARD . . . . . . . . .69 DVR-S150 SCHEMATIC DIAGRAM . . . . . . . . . .7079 NX-SW150 SCHEMATIC DIAGRAM . . . . . . . . . . . .80 PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8199 REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . .100 I CONTENTS

10、TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . .24 PREVENTION OF ELECTRO STATIC DISCHARGE . . . . . .4 LOCALE MANAGEMENT INFORMATION . . . . . . . .5 SYSTEM COMPOSITION / 構成 . . . . . . . . . . .5 FRONT PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . .67 REMOTE CONTROL PANELS . .

11、. . . . . . . . . . . . . . . .7 REAR PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 SPECIFICATIONS / 参考仕様 . . . . . . . . . . . . . . . .1012 INTERNAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 DVR-S150 DISASSEMBLY PROCEDURES / DVR-S150分解手順 . . . . . . . . . .

12、. . . . . . . . . . . . . .1418 NX-SW150 DISASSEMBLY PROCEDURES / NX-SW150分解手順 . . . . . . . . . . . . . . . . . . . . . . .1920 DVR-S150 TRAY LOCK MODE / DVR-S150 . . . . . . . . . . . . . . . . .21 DVR-S150 NX-P150 04.08 RadioFans.CN 收音机爱 好者资料库 DVR-S150/NX-P150 2 DVR-S150 NX-P150 I TO SERVICE PERS

13、ONNEL 1. Critical Components Information Components having special characteristics are marked Z and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify

14、 that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohm shunted by 0.15F. AC LEAKAGE TESTER OR EQUIVALENT EQUIPMENT UNDER TEST INSULATING TABLE WALL OUTLET GLeakage current must not exceed 0.5mA. GBe sure to test for leakag

15、e with the AC plug in both polarities. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welf

16、are Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do no

17、t inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. About lead-free solder / 無鉛 Among some types of lead-free solder currently available, it is recommended to u

18、se one of the following types for the repair work. Sn + Ag + Cu (tin + silver + copper) Sn + Cu (tin + copper) Sn + Zn + Bi (tin + zinc + bismuth) Caution: 1. As the melting point temperature of the lead-free solder is about 30C to 40C (50F to 70F) higher than that of the lead solder, be sure to use

19、 a soldering iron suitable to each solder. 無鉛種類、修理時 下記無鉛使用推奨。 Sn+Ag+Cu (錫+ 銀+銅) Sn+Cu (錫+ 銅) Sn+Zn+Bi (錫+ 亜鉛+) 注意: 1. 無鉛融点温度通常鉛入比30 40 程度高、 合使用。 The P.C.B.s installed in this unit are soldered using the fol- lowing solder. 本機搭載基板付使用 下記通。 SI DE A / A面SI DE B / B面 DI GI TAL P. C. B.Lead Free Solder /

20、無鉛Lead Free Solder / 無鉛 MAI N P. C. B.Lead Free Solder / 無鉛 SUB P. C. B.Lead Free Solder / 無鉛 Side A Side B SMT REFLOW Process MI FLOW Process Solder Dip RadioFans.CN 收音机爱 好者资料库 DVR-S150/NX-P150 DVR-S150 NX-P150 3 WARNING: Laser Safety This product contains a laser beam component. This component may

21、 emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used during servicing of the unit. 1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30

22、cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual. 3) CAUTION : Use of controls, adjustments or performance of procedures other than those specifi

23、ed herein may result in hazardous radiation exposure. Laser Emitting conditions: 1) When the Top Cover is removed, and the STANDBY/ ON SW is turned to the ON position, the laser component will emit a beam for several seconds to detect if a disc is present. During this time (5-10 sec.) the laser may

24、radiate through the lens of the laser pick- up unit. Do not attempt any servicing during this period! If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laser emissions. 2) The laser power level can be adjusted with the VR on the pick

25、-up PWB, however, this level has been set by the factory prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this manual. Adjustment of this control can increase the laser emission level from the device. 警告:安全対策 本機光線放射部品搭載。 部品放射光線目損傷

26、起。 光線目及肌保護、本機 修理作業中下記注意厳守。 ) 時修理時、 目及肌光 30c以上離。 場合光 線見。 ) 光再調整及分解。 ) 上指定以外制御、 調整、 手順光線照射結果招恐 。 放射条件 ) 取外STANDBY/ONON 、検知510秒間、光 光線放射。 間、 修理 。 検知、 光線放射停 止。 場合、 遮光線修理担当者届 。 ) 光基板上VR 調整可能、 工場出荷前調整済 、VR廻。VR廻 装置光線放射上恐 。 Laser Diode Properties Type:Semiconductor laser GaAlAs Wave length:650 nm (DVD) 790 n

27、m (VCD/CD) Output Power:1.45 mW (DVD) 1.31 mW (VCD/CD) Beam divergence:60 degree VARO!: AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NKYMTTMLLE LASER-STEILYLLE. L KATSO STEESEEN. VARNING! : OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN. 半導体 GaAlAs 波長6

28、50 nm (DVD) 790 nm (VCD/ CD) 出力1. 45 mW (DVD) 1. 31 mW (VCD/ CD) 広60 度 2. 鉛入使得場合、 交 換部品端子部周辺部無鉛取 除、 無鉛鉛入十分 溶状態付。 2. If lead solder must be used, be sure to remove lead-free solder from each terminal section of the parts to be re- placed and from the area around it completely before sol- dering, or m

29、ake sure that the lead-free solder and lead solder melt together fully. DVR-S150/NX-P150 4 DVR-S150 NX-P150 I PREVENTION OF ELECTRO STATIC DISCHARGE The laser diode in the traverse unit (optical pickup) may be damaged due to static electricity from clothes or the human body. Use caution to prevent e

30、lectrostatic damage when servicing or handling the laser diode. 1. Grounding for electrostatic damage prevention Some devices, such as the DVD player, use an optical pickup (laser diode) that will be damaged by static electricity in the working environment. Only attempt service after ensuring that a

31、ll grounding procedures have been completed. 1. Worktable grounding Put a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed. 2. Human body grounding Use an anti-static wrist strap to discharge the static electricity from your body. 2. Handling of the o

32、ptical pickup 1. To prevent damage to the optical pickup replacement parts during transportation and before installation, both ends of the laser diode are short-circuited. After installing the new part, remove the short circuit according to the correct procedure in this service manual. 2. Do not use

33、 a tester to check the laser diode in the optical pickup. The power supply in the tester will damage the laser diode. 3. Handling Precautions for the Traverse Unit (Optical Pickup) 1. Handle the traverse unit (optical pickup) gently, as it is an extremely high-precision assembly. 2. The flexible cab

34、le lines may break if an excessive force is applied to it. Use caution when handling the cable. 3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resistor. WARNING The use of optical instruments with this product will increase eye hazard. Repair handling s

35、hould take place as much as possible with a disc loaded inside the player. 1M Conductive material (sheet) or steel sheet Anti-static wrist strap U, C, R, T, K, A, B, G, E, L models DVD MECHANISM BOTTOM VIEWTOP VIEW U, C, R, T, K, A, B, G, E, L models DVR-S150/NX-P150 DVR-S150 NX-P150 5 I LOCALE MANA

36、GEMENT INFORMATION Locale Management Information : This DVD player is designed and manufactured to respond to the Locale Management Information that is recorded on a DVD disc. If the Locale number described on the DVD disc does not correspond to the Locale number of this DVD player, this DVD player

37、cannot play this disc. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized

38、by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. q w r w t t r w y e t The DVX-S150 is composed of the DVR-S150 and the NX-P150. I SYSTEM COMPOSITION / 構成

39、 NX-S150NX-S150 NX-C150 NX-SW150 DVR-S150 NX-P150 DVR-S150/NX-P150 6 DVR-S150 NX-P150 M DVR-S150 I FRONT PANELS B, G, E models U, C, R, T, K, A, L models J model U, C, R, T, K, A, L, J models only DVR-S150/NX-P150 DVR-S150 NX-P150 7 M NX-SW150 M DVR-S150 SI (B, G, E models) I REMOTE CONTROL PANELS M

40、 DVR-S150 SI (J model) M DVR-S150 SI (U, C, R, T, K, A, L models) M NX-C150M NX-S150 M DVR-S150 BL (U, C, A models) WD52690 DVR-S150/NX-P150 8 DVR-S150 NX-P150 I REAR PANELS M DVR-S150 (U, C, R, T, K, A, L models) M DVR-S150 (B, G, E models) M DVR-S150 (J model) NX-S150 IMPEDANCE NOMINAL MAXIMUM INP

41、UT INPUT 6 OHMS 30 WATTS 100 WATTS NX-C150 IMPEDANCE NOMINAL MAXIMUM INPUT INPUT 6 OHMS 30 WATTS 100 WATTS M NX-S150 M NX-C150 DVR-S150/NX-P150 DVR-S150 NX-P150 9 NX-SW150 40 M NX-SW150 (U, C models) NX-SW150 40 M NX-SW150 (B, G, E models) NX-SW150 40 M NX-SW150 (R, T, K, L models) NX-SW150 40 M NX-

42、SW150 (A model) NX-SW150 25 M NX-SW150 (J model) DVR-S150/NX-P150 10 DVR-S150 NX-P150 I SPECIFICATIONS / 参考仕様 AMPLIFIER SECTION / 部 Input Sensitivity/Impedance / 入力感度/ VCR, VIDEO . . . . . . . . . . . . . . . . . . . . .200 mV/47 k Maximum Input Signal / 最大許容入力 VCR, VIDEO (1kHz, 0.5 % THD) . . . . .

43、 . . . . . . . .2.2 V Output Level/Impedance / 出力電圧/ (when 1 kHz, 200 mV is input) REC OUT . . . . . . . . . . . . . . . . . . . . . .200 mV/1.2 k PRE OUT (SUBWOOFER/FRONT SP Small, 50Hz) . . .4V Frequency Response / 周波数特性 REC OUT (FRONT L/R, 20 Hz to 20 kHz) . . .0/-1 dB Signal to Noise Ratio (IHF-

44、A Network) / S/ N比 VCR, VIDEO (REC OUT, Input shorted, 200mV) . . .90 dB Minimum RMS Output Power / 定格出力 R, T, K, A, B, G, E, L, J models FRONT L/R (6 , 1 kHz, 0.9% THD) . . . . . . . .45 W/ch CENTER (6 , 1 kHz, 0.9% THD) . . . . . . . . . . . .45 W SURROUND L/R (6 , 1 kHz, 0.9% THD) . . . .45 W/ch

45、U, C models FRONT L/R (6 , 20 Hz to 20 kHz, 0.9% THD) . . .45 W/ch CENTER (6 , 20 Hz to 20 kHz, 0.9% THD) . . . . . .45 W SURROUND L/R (6 , 20 Hz to 20 kHz, 0.9% THD) . . .45 W/ch Maximum Power (EIAJ) / 実用最大出力 FRONT L/R (6 , 1 kHz, 10% THD) . . . . . . . .55 W/ch CENTER (6 , 1 kHz, 10% THD) . . . .

46、. . . . . . . .55 W SURROUND L/R (6 , 1 kHz, 10% THD) . . . .55 W/ch Total Harmonic Distortion / 全高調波歪率 FRONT L/R (1 kHz, 20 W, SP OUT) . . . . . . . .0.05 % VIDEO SECTION (VCR, VIDEO) / 部 Video Signal Type / 信号方式 . . . . . . . . . .NTSC/PAL Video Signal Level / 信号 Video . . . . . . . . . . . . . .

47、. . . . . . . . . . . . .1 Vp-p/75 S-Video Y . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 C . . . . . . . . . . . . . . . . . . . . . . . 0.286 Vp-p/75 Maximum Input Level / 最大許容入力 VCR, VIDEO . . . . . . . . . . . . . . . . . . . . . . . . .1.5 Vp-p Signal to Noise Ratio / S/ N比 Mon

48、itor Out . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 dB Frequency Response / 周波数帯域 Monitor Out (5 Hz to 10 MHz) Video . . . . . . . . . . . . . . . . . . . . . . . . . . . .0/-3 dB S-Video . . . . . . . . . . . . . . . . . . . . . . . . . .0/-3 dB TUNER SECTION / 部 FM Tuning Range / FM

49、受信周波数範囲 U, C models . . . . . . . . . . . . . . . . . .87.5 to 107.9 MHz T, K, A, B, G, E models . . . . . . . 87.50 to 108.00 MHz R, L models . . . . . . . . . . . . . . . . . . 87.5 to 108.0 MHz 87.50 to 108.00 MHz J model . . . . . . . . . . . . . . . . . . . . . . 76.0 to 90.0 MHz AM Tuning Range / AM受信周波数範囲 U, C models . . . . . . . . . . . . . . . . . . . 530 to 1710 kHz DVR-S150 T, K, A, B, G, E, J models . . . . . . . . 531 to 1611 kHz R, L models . . . . . . . . . . . . . . . . . . . 530 to 1710 kHz 531 to 1611 kHz DVD SECTION / DVD部 Output Level / 出力

展开阅读全文
相关资源
猜你喜欢
相关搜索
资源标签

当前位置:首页 > 功放/音响/收扩 > Yamaha

copyright@ 2008-2025 收音机爱好者资料库 版权所有
备案编号:鄂ICP备16009402-5号