Yamaha-DVDS-6160-Service-Manual电路原理图.pdf

《Yamaha-DVDS-6160-Service-Manual电路原理图.pdf》由会员分享，可在线阅读，更多相关《Yamaha-DVDS-6160-Service-Manual电路原理图.pdf（30页珍藏版）》请在收音机爱好者资料库上搜索。

1、SERVICE MANUAL 101050 SERVICE MANUAL P.O.Box 1, Hamamatsu, Japan SERVICE MANUAL IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAM

2、AHA Products, are already known and understood by the users, and have therefore not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform

3、 as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization,

4、 certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continu

5、ally striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expens

6、ive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the uni

7、t. I CONTENTS TO SERVICE PERSONNEL . 23 PREVENTION OF ELECTROSTATIC DISCHARGE . 4 LOCALE MANAGEMENT INFORMATION . 4 FRONT PANELS. 5 REAR PANELS . 5-6 REMOTE CONTROL PANEL . 6 SPECIFICATIONS. 67 INTERNAL VIEW . 8 REPAIR NOTES. 9 TRADE MODE. 9 2007 All rights reserved. This manual is copyrighted by YA

8、MAHA and may not be copied or redistributed either in print or electronically without permission. DVD-S661/ DV-S6160 07.05 This service manual is for the DVD-S661/DV-S6160 (U, K, A, L, P models). For the DVD-S661 (G model) service manual, please refer to the following service manual: DVD-S661 (G mod

9、el): 101047 For U, K, A, L, P models DISASSEMBLY PROCEDURES . 10 TEST MODE . 11 BLOCK DIAGRAM. 12 WIRING DIAGRAM . 13 PRINTED CIRCUIT BOARDS. 1419 SCHEMATIC DIAGRAMS. 2026 REPLACEMENT PARTS LIST . 2829 REMOTE CONTROL. 29 SCENE CONTROL. 30 DVD-S661/DV-S6160 DVD PLAYER RadioFans.CN 收音机爱 好者资料库 DVD-S661

10、/DV-S6160 DVD-S661/ DV-S6160 2 WALL OUTLET EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING TABLE I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked Z and must be replaced with parts having specifications equal to those origi

11、nally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohms shunted by 0.15F. GLeakage current m

12、ust not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polari- ties. WARNING: Laser Safety This product contains a laser beam component. This component may emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiatio

13、n, the following precautions must be used during servicing of the unit. 1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30 cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust,

14、 disassemble or repair the laser pick-up, unless noted elsewhere in this manual. 3) CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of

15、 this product contains LEAD. In addition, other electrical/electronic and/or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO

16、NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components l

17、ocated inside the enclosure of this product, wash your hands before handling food. Laser Emitting conditions: 1) When the Top Cover is removed, and the STANDBY/ON SW is turned to the ON position, the laser component will emit a beam for several seconds to detect if a disc is present. During this tim

18、e (5-10 sec.) the laser may radiate through the lens of the laser pick-up unit. Do not attempt any servicing during this period! If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laser emissions. 2) The laser power level can be adjus

19、ted with the VR on the pick-up PWB, however, this level has been set by the factory prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this manual. Adjustment of this control can increase the laser emission level from the device. La

20、ser Diode Properties Type:Semiconductor laser GaAlAs Wave length:650 nm (DVD) 780 nm (VCD/CD) Output Power:7 mW (DVD) 10 mW (VCD/CD) Beam divergence:60 degree RadioFans.CN 收音机爱 好者资料库 DVD-S661/DV-S6160 3 DVD-S661/ DV-S6160 WARNING The use of optical instruments with this product will increase eye haz

21、ard. Repair handling should take place as much as possible with a disc loaded inside the player. Warning for power supply The primary side of the power supply carries live mains voltage when the player is connected to the mains even when the player is switched off ! This primary area is not shielded

22、 so it is possible to touch copper tracks and/or components when servicing the player. Service personnel have to take precautions to prevent touching this area or components in this area. Note: The screws on the DVD mechanism may never be touched, removed or re-adjusted. Handle the DVD mechanism wit

23、h care when the unit has to be exchanged! The DVD mechanism is very sensitive for dropping or giving shocks. DVD-S661/DV-S6160 DVD-S661/ DV-S6160 4 1 4 2 2 2 5 5 5 4 3 6 I PREVENTION OF ELECTROSTATIC DISCHARGE This product incorporates copyright pro- tection technology that is protected by method cl

24、aims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise autho

25、rized by Macrovision Corporation. Reverse engineer- ing or disassembly is prohibited. The laser diode in the DVD mechanism may be damaged due to static electricity from clothes or the human body. Use caution to prevent electrostatic damage when servicing or handling the DVD-mechanism. 1. Grounding f

26、or electrostatic damage prevention Some devices, such as the DVD player, use an optical pickup (laser diode) that will be damaged by static electricity in the working environment. Only attempt service after ensuring that all grounding procedures have been completed. 1. Worktable grounding Put a grou

27、nded conductive material (sheet) or iron sheet on the area where the optical pickup is placed. 2. Human body grounding Use an anti-static wrist strap to discharge the static electricity from your body. 1M-ohms Conductive material (sheet) or steel sheet Anti-static wrist strap 2. Handling Precautions

28、 for DVD mechanism 1. Handle the DVD mechanism gently, as it is an extremely high-precision assembly. 2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling the cable. 3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do no

29、t turn the resistor. I LOCALE MANAGEMENT INFORMATION Locale Management Information : This DVD player is designed and manufactured to respond to the Locale Management Information that is recorded on a DVD disc. If the Locale number described on the DVD disc does not correspond to the Locale number of

30、 this DVD player, this DVD player cannot play this disc. DVD-S661/DV-S6160 5 DVD-S661/ DV-S6160 I FRONT PANELS DVD-S661 (U, K, A, L, P models) I REAR PANELS DVD-S661 (U model) DV-S6160 (U model) DVD-S661 (K model) DVD-S661 (A model) DVD-S661 (L model) DVD-S661/DV-S6160 DVD-S661/ DV-S6160 6 I SPECIFI

31、CATIONS PLAYBACK SYSTEM DVD Video, VR (Video Recording) format (DVD-RW) DVD-R, DVD-RW, DVD-R DL DVD+R, DVD+RW, DVD+R DL Video CD, SVCD CD PICTURE CD CD-R, CD-RW MP3 (ISO 9660)fs 32, 44.1, 48 kHz / 96, 128, 256, 320 kbps (Constant bit rate) WMAfs 44.1 kHz, 62 to 192 kbps / fs 48 kHz, 128 to 192 kbps

32、(Constant bit rate) DivX JPEG3072 x 2048 dpi or less VIDEO PERFORMANCE Video (CVBS) output1 Vpp into 75 ohms S-Video outputY: 1 Vpp into 75 ohms C: 0.3 Vpp into 75 ohms Component video output Y: 1 Vpp into 75 ohms PB/PR: 0.7 Vpp into 75 ohms HDMI upscaling720 p, 1080 i AUDIO FORMAT Digital Dolby Dig

33、ital, DTS, MPEG Compressed digital PCMfs 44.1, 48, 96 kHz / 16, 20, 24 bits Analog soundStereo AUDIO PERFORMANCE DA converter24 bits Signal to noise (1 kHz)105 dB Dynamic range (1 kHz)97 dB DVDfs 96 kHz2 Hz to 44 kHz fs 48 kHz2 Hz to 22 kHz SVCDfs 48 kHz2 Hz to 22 kHz fs 44.1 kHz2 Hz to 20 kHz CD/VC

34、Dfs 44.1 kHz2 Hz to 20 kHz Distortion and noise0.0035 % (1 kHz) I REMOTE CONTROL PANEL DVD-S661 (P model) DV-S6160 (U model) DVD-S661/DV-S6160 7 DVD-S661/ DV-S6160 MULTIMEDIA (USB) APPLICATIONS ConnectionsUSB mass storage class device Playback formats (USB device) MP3fs 32, 44.1, 48 kHz / 96, 128, 2

35、56, 320 kbps (Constant bit rate) WMAfs 44.1 kHz, 62 to 192 kbps / fs 48 kHz, 128 to 192 kbps (Constant bit rate) DivX3 Mbps or less JPEG3072 x 2048 dpi or less Supported USB devicesFLASH memory (FAT16 or FAT32 format)Card reader (up to 6 slots) Portable audio player External hard disk drive (80 GB o

36、r less) TV STANDARD(PAL/50 Hz)(NTSC/60 Hz) Number of lines625525 PlaybackMultistandard(PAL/NTSC) CONNECTIONS Video outputRCA/Phono x 1 (yellow) S-video outputMini DIN, 4 pins x 1 Component video output Y outputRCA/Phono x 1 (green) PB outputRCA/Phono x 1 (blue) PR outputRCA/Phono x 1 (red) Audio out

37、put (L+R)RCA/Phono x 1 pair (white/red) Digital output CoaxialRCA/Phono x 1 IEC60958 for CDDA, LPCM / IEC61937 for MPEG 1/2, Dolby Digital and DTS HDMI (HDMI 1.0)Type A x 1 USBType A x 1 Remote control Input3.5 mm mini jack x 1 Output3.5 mm mini jack x 1 GENERAL Dimensions (W x H x D)435 x 51 x 318

38、mm (17-1/8 x 2 x 12-1/2) WeightApprox. 2.6 Kg (5 lbs. 12 oz) Finish DVD-S661Black color (U, A, P models) Titanium color (U, K, L models) Silver color (U model) DV-S6160Black color (U model) Silver color (U model) Power supplyAC 120 V, 60 Hz (U model) AC 110-240 V, 60 Hz (K model) AC 110-240 V, 50/60

39、 Hz (A, L, P models) Power consumptionApprox. 14 W Standby power consumption Less than 1 W ACCESSORIES Remote control x 1 Battery (AAA, R03, UM-4) x 2 Audio / video cable (1.5 m) x 1 *Specifications are subject to change without prior notice. U . U.S.A. model K . Korean model A . Australian model L

40、. Singapore model P. South America model DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license. “DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc. Manufactured under license from Dolby Labo- ratories. “Dolby”, “Pro Logic” and the dou

41、ble-D symbol are trademarks of Dolby Laboratories. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection te

42、chnology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is pro- hibited. HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks

43、 or reg- istered trademarks of HDMI Licensing LLC. DIMENSIONS 310 (12-3/16) 6 (1/4) 318 (12-1/2) 2 (1/16) 435 (17-1/8) 6 (1/4) 45 (1-3/4) 51 (2) Unit: mm (inch) DVD-S661/DV-S6160 DVD-S661/ DV-S6160 8 I INTERNAL VIEW 67 8 1432 1 AV P.C.B. 2 FRONT (4) P.C.B.3 MONO P.C.B. 4 Power Supply Unit 5 DVD Mech

44、anism 6 FRONT (2) P.C.B. 7 FRONT (1) P.C.B. 8 FRONT (3) P.C.B. 5 DVD-S661/DV-S6160 9 I TRADE MODE This unit provides TRADE mode which prevents the tray from opening even when the “OPEN/CLOSE” key is pressed. Activating TRADE mode The power to the main unit should be turned on before activating the T

45、RADE mode. 1. Press the “OPEN/CLOSE” key to open the tray. (Fig. 1) 2. Press the “2”, “5” and “9” keys on the remote control in that order. (Fig. 2) 3. “TRA ON” is displayed and TRADE mode is activated. About 2 seconds later, the tray is closed automatically. (Fig. 3) Canceling TRADE mode The power

46、to the main unit should be turned on before canceling TRADE mode. 1. Press and hold the “STOP” key on the remote control. (Fig. 2) The tray opens after about 2 second. 2. Press the “2”, “5” and “9” keys on the remote control in that order. (Fig. 2) 3. “TRA OFF” is displayed and TRADE mode is cancelled. About 2 seconds later, the tray is closed automatically. (Fig. 4) Fig. 1 Fig. 2 TRADE mode display Fig. 3 Fig. 4 Enter Cancel None of the components of the following unit can be supplied separately. Each unit must be replaced as a whole in case of a failure. I REPAIR NOTES ST