Yamaha-DVDS-530-Service-Manual电路原理图.pdf

《Yamaha-DVDS-530-Service-Manual电路原理图.pdf》由会员分享，可在线阅读，更多相关《Yamaha-DVDS-530-Service-Manual电路原理图.pdf（84页珍藏版）》请在收音机爱好者资料库上搜索。

1、DVD-S530/DV-S5550 DVD-S530/DV-S5550 1 SERVICE MANUAL DVD PLAYER DVD-S530/DV-S5550 100817 I CONTENTS TO SERVICE PERSONNEL . 23 PREVENTION OF ELECTRO STATIC DISCHARGE.4 LOCALE MANAGEMENT INFORMATION . 4 FRONT PANELS. 5 REMOTE CONTROL. 6 REAR PANELS . 67 SPECIFICATIONS. 8 SERVICE HINTS . 9 DISASSEMBLY

2、PROCEDURES . 10 DIAGNOSTIC SOFTWARE AND TROUBLESHOOTING . 1119 TEST INSTRUCTION FRONT DISPLAY AND AUDIO/VIDEO BOARD. 2021 CIRCUIT DESCRIPTIONS . 2228 ABBREVIATION LIST . 29 TECHNICAL SPECIFICATIONS DVD MODULE. 30 IC DESCRIPTIONS . 3139 WIRING DIAGRAM . 40 BLOCK DIAGRAM. 41 PRINTED CIRCUIT BOARD . 42

3、59 SCHEMATIC DIAGRAM . 6074 PARTS LIST. 7582 REMOTE CONTROL. 83 IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, ar

4、e already known and understood by the users, and have therefore not been restated. WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. F

5、or these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification o

6、r recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to

7、 improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors Service Division. WARNING:Static discharges can destroy expensive components.

8、Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. P.O.Box 1, Ha

9、mamatsu, Japan RadioFans.CN 收音机爱 好者资料库 DVD-S530/DV-S5550 DVD-S530/DV-S5550 2 WARNING: CHEMICAL CONTENT NOTICE! The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and /or plastic (where applicable) components may also contain traces of chemicals

10、found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA- SON WHATSOEVER! Avoid prolonged, unprotected contact between so

11、lder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food. WARNING: Laser Safety This product contains a laser beam component.

12、 This component may emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used during servicing of the unit. 1) When testing and/or repairing any component within the product, keep your eyes and

13、 skin more than 30 cm away from the laser pick-up unit at all times. Do not stare at the laser beam at any time. 2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual. 3) CAUTION: Use of controls, adjustments or performance of procedures other

14、than those specified herein may result in hazardous radiation exposure. Laser Emitting conditions: 1) When the Top Cover is removed and the STANDBY/ON SW is turned to the ON position, the laser component will emit a beam for several seconds to detect if a disc is present. During this time (5 - 10 se

15、c.) the laser may radiate through the lens of the laser pick-up unit. Do not attempt any servicing during this period! If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laser emissions. 2) The laser power level can be adjusted with t

16、he VR on the pick-up PWB. However, this level has been set by the factory prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this manual. Adjustment of this control can increase the laser emission level from the device. WALL OUTLET

17、EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING TABLE I TO SERVICE PERSONNEL 1. Critical Components Information Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measure

18、ment (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. GMeter impedance should be equivalent to 1500 ohm shunted by 0.15F. CAUTION 1110: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, R

19、EPLACE ONLY WITH SAME TYPE 2A, 250V FUSE. CAUTION 1110: REPLACE WITH SAME TYPE 2A, 250V FUSE. ATTENTION 1110: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE DE 2A, 250V. GLeakage current must not exceed 0.5mA. GBe sure to test for leakage with the AC plug in both polarities. THE DVD AUDIO/VIDEO RECEIV

20、ER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. RadioFans.CN 收音机爱 好者资料库 DVD-S530/DV-S5550 DVD-S530/DV-S5550 3 CAUTION - Visible and invisible laser radiation when open. Avoid exposure to beam. DANGERVISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID D

21、IRECT EXPOSURE TO BEAM. CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT MODEL NO. DVD S530 20 WATTS 60Hz120 VOLTS MADE IN CHINA (R, A, B, G, T, P, K model) CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT U, C modelsR, A, B

22、, G, T, P, K model CAUTION - Visible and invisible laser radiation when open. Avoid exposure to beam. Laser Diode Properties Type:Semiconductor laser GaAlAs Wave length:650 nm (DVD) 780 nm (VCD/CD) Output Power:0.8 mW (DVD) 0.3 mW (VCD/CD) Beam divergence:60 degree VARO!: AVATTAESSA JA SUOJALUKITUS

23、OHITETTAESSA OLET ALTTIINA NkymTTMLLE LASER- STEILYLLE. L KATSO STEESEEN. VARNING!: OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN. WARNING The use of optical instruments with this product will increase eye hazard. Repair handling should take place as much as p

24、ossible with a disc loaded inside the player WARNING LOCATION: REAR PANEL CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM ADVARSEL SYNLIG OG USYNLIG LASERSTRLING VED BNING UNDG UDSTTELSE FOR STRLING ADVARSEL SYNLIG OG USYNLIG LASERSTRLING NR DEKSEL PNES UNNG EKSPONERI

25、NG FOR STRLEN VARNING SYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD BETRAKTA EJ STRLEN VARO! AVATT AESSA OLET ALTTIINA NKYVLLE JA NKYMTTMLLE LASER STEILYLLE. L KATSO STEESEEN VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEFFNET NICHT DEM STRAHL AUSSETSEN DANGER VISIBLE AN

26、D INVISIBLE LASER RADIATI ON WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS DOUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU Warning for power supply The primary side of the power supply carries live mains voltage when the player is connected to the main

27、s even when the player is switched off ! This primary area is not shielded so it is possible to touch copper tracks and/or components when servicing the player. Service personnel have to take precautions to prevent touching this area or components in this area . The primary side of the power supply

28、has been indicated with a lightening stroke and a stripe-marked print on the printed wiring board Note: The screws on the DVD mechanism (position 9 in on the exploded view drawing) may never be touched, removed or re-adjusted. Handle the DVD mechanism with care when the unit has to be exchanged! The

29、 DVD mechanism is very sensitive for dropping or giving shocks. DVD-S530/DV-S5550 DVD-S530/DV-S5550 4 1 2 4 2 5 5 4 2 6 3 5 I LOCALE MANAGEMENT INFORMATION Locale Management Information : This DVD player is designed and manufactured to respond to the Locale Management Information that is recorded on

30、 the DVD disc. If the Locale number described on the DVD disc does not correspond to the Locale number of this DVD player, this DVD player cannot play this disc. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectua

31、l property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineer

32、ing or disassembly is prohibited. I PREVENTION OF ELECTRO STATIC DISCHARGE The laser diode in the DVD mechanism may be damaged due to static electricity from clothes or the human body. Use caution to prevent electrostatic damage when servicing or handling the DVD-mechanism. 1. Grounding for electros

33、tatic damage prevention Some devices, such as the DVD player, use an optical pickup (laser diode) that will be damaged by static electricity in the working environment. Only attempt service after ensuring that all grounding procedures have been completed. 1. Worktable grounding Put a grounded conduc

34、tive material (sheet) or iron sheet on the area where the optical pickup is placed. 2. Human body grounding Use an anti-static wrist strap to discharge the static electricity from your body. 1M Conductive material (sheet) or steel sheet Anti-static wrist strip 2. Handling Precautions for DVD mechani

35、sm 1. Handle the DVD mechanism gently, as it is an extremely high-precision assembly. 2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling the cable. 3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resis

36、tor. DVD-S530/DV-S5550 DVD-S530/DV-S5550 5 I FRONT PANELS DVD-S530 DV-S5550 I REMOTE CONTROL DVD-S530/DV-S5550 DVD-S530/DV-S5550 6 I REAR PANELS DVD-S530 B, G models DVD-S530 U, C models DVD-S530 A model DVD-S530 R model DVD-S530 P model DVD-S530/DV-S5550 DVD-S530/DV-S5550 7 DV-S5550 U, C model DV-S

37、5550 A model DV-S5550 G model DVD-S530 K model DVD-S530/DV-S5550 DVD-S530/DV-S5550 8 TruSurround and the SRS symbol are trademarks of SRS Labs., Inc. TruSurround technology is incorporated under license from SRS Labs., Inc. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D

38、 symbol are trademarks of Dolby Laboratories. ”DTS” and ”DTS Digital Out” are trademarks of Digital Theater Systems, Inc. I SPECIFICATIONS PLAYBACK SYSTEM DVD Video DVD+RW DVD+R Video CD and SVCD CD (CD-R and CD-Rw) MP3 CD TV STANDARD(PAL/50Hz)(NTSC/60Hz) Number of lines625525 PlaybackMultistandard

39、(PAL/NTSC) VIDEO PERFORMANCE Video output1 Vpp into 75 ohm RGB (SCART) output0.7 Vpp into 75 ohm Black Level ShiftOn/Off Video ShiftLeft/Right AUDIO FORMAT DigitalMPEGCompressed Digital DTS/Dolby Digital PCM16, 20, 24 bits fs, 44.1, 48, 96 kHz Analog Sound Stereo Dolby Pro Logic downmix from Dolby D

40、igital multi-channel sound 3D Sound (TruSurround) for virtual 5.1 channel sound on 2 speakers AUDIO PERFORMANCE DA Converter24 bits DVDfs 96 kHz2 Hz 44 kHz DVDfs 48 kHz2 Hz 22 kHz VCD/CDfs 44.1 kHz2 Hz 20 kHz Signal-Noise (1kHz)105 dB Dynamic Range (1kHz)100 dB Harmonic Distortion and Noise (1kHz)0.

41、0030 % MPEG MP3MPEG Audio L3 CONNECTIONS Y OutputCinch (green)(U, C, R, A, P, K) Pb/Cb OutputCinch (blue)(U, C, R, A, P, K) Pr/Cr OutputCinch (red)(U, C, R, A, P, K) SCARTEuroconnector(B, G) S-Video OutputMini DIN, 4 pins Video OutputCinch (yellow) Audio L+R outputCinch (white/red) Audio SubwooferCi

42、nch (black) Digital Output1 coaxial, 1 optical IEC958 for CDDA / LPCM IEC1937 for MPEG1/2, Dolby Digital, DTS GENERAL Dimensions(w x h x d) 435 x 75 x 302 mm (17-1/8 x 2-15/16 x 11-7/8) WeightApprox. 2.8 Kg (6 lbs. 3 oz.) FinishDVD-S530Gold Black Titanium DV-S5550Black Titanium Power supply120 V, 60

43、 Hz (U, C) 230 V, 50 Hz (B, G) 240 V, 50 Hz (A) 110240 V, 50/60 Hz (R, P, K) Power consumption17 W Standby power con-3 W sumption (reference data) * Specifications are subject to change without notice due to product improvements. U . U.S.A. modelC . Canada model G . Europe modelB . British model A .

44、 Australia modelR . General model P.South America modelK . Korean model This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this co

45、pyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. DVD-S530/DV-S5550 DVD-S530/DV-S5550 9 I SERVICE HINTS G

46、Power Supply Unit The power supply unit has to be replaced in case of failure. The schematic provided in the manual is only for information and no service parts will be available. G DVD Mechanism 1. The DVD mechanism is not a repairable unit and in case of failure, it has to be replaced with a new DVD mechanism. Note: When replacing with a new DVD mechanism, two solder joints have to be removed after connecting the OPU flex foil to the mono board. The solder joints, which shortcircuits the laser diodes to ground, are for protection