Yamaha-HTR-2064-Service-Manual电路原理图.pdf

《Yamaha-HTR-2064-Service-Manual电路原理图.pdf》由会员分享，可在线阅读，更多相关《Yamaha-HTR-2064-Service-Manual电路原理图.pdf（96页珍藏版）》请在收音机爱好者资料库上搜索。

1、11.12 Copyright 2011 All rights reserved. This manual is copyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission. 101 2 2 7 SERVICE MANUAL IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their ser

2、vice personnel. It has been assumed that basic service procedures inherent to the industry, and more specifi cally YAMAHA Products, are already known and understood by the users, and have therefore not been restated. WARNING: Failure to follow appropriate service and safety procedures when servicing

3、 this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specifi ed. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service repres

4、entative. IMPORTANT: The presentation or sale of this manual to any individual or fi rm does not constitute authorization, certifi cation or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and

5、 applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifi cations are subject to change without notice or obligation to retrofi t. Should an

6、y discrepancy appear to exist, please contact the distributors Service Division. WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this

7、buss). IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit. CONTENTS TO SERVICE PERSONNEL .2 SYSTEM COMPOSITION .3 FRONT PANELS .34 REAR PANELS .57 REMOTE CONTROL PANEL .8 SPECIFICATIONS .814 INTERNAL VIEW .15 SERVICE PRECAUTIONS

8、.15 POWERAMPLIFIER IC REPLACEMENT .1617 DISASSEMBLY PROCEDURES .1820 UPDATING FIRMWARE .2123 SELF-DIAGNOSTIC FUNCTION .2446 DISPLAY DATA .4748 IC DATA .4960 PIN CONNECTION DIAGRAMS .6162 BLOCK DIAGRAM .63 PRINTED CIRCUIT BOARDS .6476 SCHEMATIC DIAGRAMS .7784 REPLACEMENT PARTS LIST .8592 REMOTE CONTR

9、OL .9394 ADVANCED SETUP .95 The YHT-196 consists of the HTR-2064, NS-B20, NS-C20 and NS-SWP20. Note: When the following parts are replaced, the destination MUST be written to the back-up IC (EEPROM: IC222 on DIGITAL P.C.B.) to have proper operation. (For details, refer to No. 22 SOFT SWITCH menu of

10、the self-diagnostic function.) DIGITAL P.C.B. EEPROM: IC222 on DIGITAL P.C.B. When the power amplifier IC (IC 1 or IC 2 on MAIN P.C.B.) requires to be replaced, be sure to refer to “POWER AMPLIFIER IC REPLACEMENT” before its replacement. P.O.Bo 1, Hamamatsu, apan RECEIVER / SPEAKERS HTR-2064 / NS-B2

11、0/NS-C20/NS-SWP20 HTR-2064/NS-B20/ NS-C20/NS-SWP20 HOME THEATER PACKAGEYHT-196 RadioFans.CN 收音机爱 好者资料库 This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YO

12、UR MOUTH FOR ANY REASON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before

13、 handling food. 1. Critical Components Information Components having special characteristics are marked and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative t

14、o verify that all exposed conductive surfaces are properly insulated from supply circuits. Meter impedance should be equivalent to 1500 ohms shunted by 0.15 F. All of the P.C.B.s installed in this unit and solder joints are soldered using the lead free solder. Among some types of lead free solder cu

15、rrently available, it is recommended to use one of the following types for the repair work. Sn + Ag + Cu (tin + silver + copper) Sn + Cu (tin + copper) Sn + Zn + Bi (tin + zinc + bismuth) Caution: As the melting point temperature of the lead free solder is about 30C to 40C (50F to 70F) higher than t

16、hat of the lead solder, be sure to use a soldering iron suitable to each solder. TO SERVICE PERSONNEL Leakage current must not exceed 0.5mA. Be sure to test for leakage with the AC plug in both polarities. WARNING: CHEMICAL CONTENT NOTICE! About lead free solder For U model “CAUTION” “F1501: FOR CON

17、TINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 6A, 125V FUSE.” For C model CAUTION F1501: REPLACE WITH SAME TYPE 6A, 125V FUSE. ATTENTION F1501: UTILISER UN FUSIBLE DE RECHANGE DE MME TYPE DE 6A, 125V. WALL OUTLET EQUIPMENT UNDER TEST AC LEAKAGE TESTER OR EQUIVALENT INSULATING T

18、ABLE 2 HTR-2064/NS-B20/NS-C20/NS-SWP20 HTR-2064/NS-B20/ NS-C20/NS-SWP20 RadioFans.CN 收音机爱 好者资料库 SYSTEM COMPOSITION The YHT-196 consists of the HTR-2064, NS-B20 x4, NS-C20 x1 and NS-SWP20 x1. FRONT PANELS Top view (U, C, R, A, B, G, F, L models) Front view (U, C, R, A, B, G, F, L models) NS-SWP20 x 1

19、 NS-C20 x 1 NS-B20 x 4 HTR-2064 x 1 YHT-196 HTR-2064 3 HTR-2064/NS-B20/NS-C20/NS-SWP20 HTR-2064/NS-B20/ NS-C20/NS-SWP20 NS-B20 NS-C20 Front view NS-SWP20 Side view NS-B20/NS-C20/NS-SWP20 4 HTR-2064/NS-B20/NS-C20/NS-SWP20 HTR-2064/NS-B20/ NS-C20/NS-SWP20 REAR PANELS U, C models R model A model HTR-20

20、64 5 HTR-2064/NS-B20/NS-C20/NS-SWP20 HTR-2064/NS-B20/ NS-C20/NS-SWP20 B, G, F models L model 6 HTR-2064/NS-B20/NS-C20/NS-SWP20 HTR-2064/NS-B20/ NS-C20/NS-SWP20 NS-C20 NS-B20 U model NS-SWP20 NS-B20/NS-C20/NS-SWP20 7 HTR-2064/NS-B20/NS-C20/NS-SWP20 HTR-2064/NS-B20/ NS-C20/NS-SWP20 REMOTE CONTROL PANE

21、L RAV435 (U, C, R, A, B, G, F, L models) SPECIFICATIONS Audio Section Rated Output Power (0.9 % THD, 6 ohms) 2 channel driven (U, C models) FRONT L/R (1 kHz) .80 W + 80 W CENTER (1 kHz) .80 W SURROUND L/R (1 kHz) .80 W + 80 W SUBWOOFER (50 Hz) .80 W 1 channel driven FRONT L/R (1 kHz) .100 W/ch CENTE

22、R (1 kHz) .100 W SURROUND L/R (1 kHz) .100 W/ch SUBWOOFER (50 Hz) .100 W Maximum Effective Output Power (1 channel driven, JEITA) (10 % THD, 6 ohms) R, L models FRONT L/R (1 kHz) .135 W + 135 W CENTER (1 kHz) .135 W SURROUND L/R (1 kHz) .135 W + 135 W SUBWOOFER (50 Hz) .135 W Dynamic Power Per Chann

23、el (1 channel driven, IHF) FRONT L/R U, C models 6/4/2 ohms .130/160/180 W R, A, B, G, F, L models 6/4/2 ohms .105/130/150 W Dynamic Headroom U, C models 6 ohms .0.23 dB Input Sensitivity/Input Impedance (1 kHz, 100 W / 6 ohms) AUDIO5, etc. . 200 mV / 47 k-ohms Maximum Input Signal (1 kHz, 0.5 % THD

24、, Effect on) AUDIO5, etc. .2.3 V Output Level/Output Impedance SUBWOOFER (2 ch STEREO and FRONT speaker: Small) . 1 V / 1.2 k-ohms Headphone Jack Rated Output/Impedance (1 kHz, 50 mV) AUDIO5, etc. input . 100 mV / 470 ohms Frequency Response (10 Hz to 100 kHz) AUDIO5, etc. to FRONT L/R .0 / -3.0 dB

25、Total Harmonic Distortion (1 kHz, 50 W, 6 ohms) AUDIO5, etc. (straight) to FRONT speaker out .0.06 % or less Signal to Noise Ratio (IHF-A Network) AUDIO5, etc. (STEREO) Input shorted (250 mV) to speaker out . 98 dB or more Residual Noise (IHF-A Network) FRONT L/R to speaker out .150 V or less Channe

26、l Separation AUDIO5, etc. (Input 5.1 k-ohms shorted, 1 kHz / 10 kHz) . 60 dB or more / 45 dB or more Volume Control .MUTE / -80 dB to +16.5 dB / 0.5 dB step HTR-2064 8 HTR-2064/NS-B20/NS-C20/NS-SWP20 HTR-2064/NS-B20/ NS-C20/NS-SWP20 Tone Control Characteristics * FRONT L/R channel only BASS Boost/Cu

27、t . 6 dB / 0.5 dB step / 50 Hz Turnover frequency .350 Hz TREBLE Boost/Cut .6 dB / 0.5 dB step / 20 kHz Turnover frequency .3.5 kHz Filter Characteristics FRONT, CENTER, SURROUND (H.P.F.) .fc=40/60/80/90/100/110/120/160/200 Hz, 12 dB/oct. SUBWOOFER (L.P.F.) .fc=40/60/80/90/100/110/120/160/200 Hz, 24

28、 dB/oct. FM Section Tuning Range U, C models .87.5 to 107.9 MHz R, L models .87.5 to 108.0 / 87.50 to 108.00 MHz A, B, G, F models .87.50 to 108.00 MHz 50 dB Quieting Sensitivity (IHF) (1 kHz, 100 % Mod.) Mono .3 V (20.8 dBf) Signal to Noise Ratio (IHF) Mono / Stereo .72 dB / 70 dB Harmonic Distorti

29、on (1 kHz) Mono / Stereo .0.3 % / 0.5 % Antenna Input . 75 ohms unbalanced General Power Supply U, C models .AC 120 V, 60 Hz R model .AC 110120/220240 V, 50/60 Hz A model .AC 240 V, 50 Hz B, G, F models .AC 230 V, 50 Hz L model . AC 220240 V, 50/60 Hz Power Consumption U, C models .250 W / 320 VA R,

30、 A, B, G, F, L models .250 W Standby Power Consumption U, C, A, B, G, F, L models .0.5 W or less R model .1.0 W or less Maximum Power Consumption .440 W Dimensions (W x H x D) . 435 x 151 x 315 mm (17-1/8 x 6 x 12-3/8) Weight .7.3 kg (16.1 lbs.) Finish U, C, R, A, B, G, F, L models . Black color Acc

31、essories Remote control .x 1 Batteries (R03, AAA, UM-4) .x 2 FM antenna (1.4 m) .x 1 * Specifications are subject to change without notice. Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories. “SILENT CINEMA” is a tra

32、demark of Yamaha Corporation. “HDMI”, the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered trademarks of HDMI Licensing LLC. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, In

33、c. 9 HTR-2064/NS-B20/NS-C20/NS-SWP20 HTR-2064/NS-B20/ NS-C20/NS-SWP20 DIMENSIONS Unit: mm (inch) U .U.S.A. model C .Canadian model R .General model A .Australian model B .British model G .European model F. Russian model L.Singapore model General Finish U, C, R, A, B, G, F, L models . Black color Acc

34、essory Speaker cable (25 m) .x 1 Nonskid pad (NS-B20/NS-C20) .x 24 * Specifications are subject to change without notice. Front view Top view 435 (17-1/8) 315 (12-3/8) 274 (10-3/4) 170 (6-5/8)58 (2-1/4) 46 (1-3/4) 23 (7/8) 18 (3/4) 130 (5-1/8) 21 (7/8) 151 (6) 335 (13-1/4) 60 50 (2) HTR-2064 NS-B20/

35、NS-C20 Type .Full-range acoustic suspension speaker system Non-magnetic shielding type Driver Full-range . 7 cm (2-3/4) cone type x 1 Frequency Response NS-B20 .70 Hz to 25 kHz (-10 dB) to 45 kHz (-30 dB) NS-C20 .65 Hz to 25 kHz (-10 dB) to 45 kHz (-30 dB) Impedance .6 ohms Nominal Input . 30 W Maxi

36、mum Input . 100 W Sensitivity NS-B20 . 83 dB/2.83 V/m NS-C20 . 84 dB/2.83 V/m Input Terminal .Push type Dimensions (W x H x D) NS-B20 .115 mm x 176 mm x 88 mm (4-1/2 x 6-7/8 x 3-1/2) NS-C20 .291 mm x 101 mm x 103 mm (11-1/2 x 4 x 4) Weight NS-B20 .0.48 kg (1.06 lbs.) NS-C20 .0.68 kg (1.50 lbs.) NS-SWP20 Type .Bass reflex speaker system Non-magnetic shielding type Driver Subwoo